HOBBY BOSS [ MORE REVIEWS ] [ WEBSITE ] [ NEW STORIES ]

In-Box Review
148
F-14A Tomcat
  • move

by: Luciano Satornetti [ LITTORIO ]

History
The Grumman F-14 Tomcat is a supersonic, twin engine, two seat, variable sweep aircraft. It first flew on 21st December 1970. The F-14 was the United States Navy’s primary maritime air superiority fighter, fleet defence interceptor and tactical reconnaissance platform from 1974 until 2006. It later performed precision strike missions once it was integrated with the Low Altitude Navigation and Targeting Infrared for Night ‘LANTIRN’ system. The F-14 was developed after the collapse of the F-111B project, and was the first of the American teen series fighters which were designed incorporating the experience of air combat against Mig’s during the Vietnam war.

The first twelve F-14A’s were prototypes, the US Navy received 478 F-14A’s while 79 were received by Iran. The final 102 F-14A’s were delivered with improved TF30-P-414A engines. Additionally an 80th F-14A was built for Iran, but delivered to the US Navy.

The F-14 first deployed in 1974 with the US Navy aboard the USS Enterprise, replacing the F-4 Phantom.

The Kit
The kit arrives in a large sturdy top opening box with a nice painting of an F-14 on the lid. On lifting the lid the first impression is on how well it’s all packaged, with eight bags of sprues, two boxes containing a further twelve bags of sprues, a small sheet of PE and a bag of rubber tyres, plus three bags of decals the instruction booklet and a double sided A3 full colour decal / painting guide. That is a total of twenty six sprues making 391 plastic parts and 33 PE parts, of the 391 parts 30 are not needed for this kit these include a LANTIRN pod with pylon and a TARPs pod. Several more fragile parts are wrapped in foam for further protection including the canopy.

An idea of parts break down can be seen in the ejection seats, each of which is made of eight plastic and six PE parts plus two decals, the radar is six plastic and thirteen PE while each of the AIM-7 Sparrows is 7 parts.

OK with this kit you have some options, here’s a list:
Open / closed radome
Open / closed refuelling probe
Open / closed boarding ladder
Compressed or not nose gear leg
Open / closed cannon access panels
Deployed or not Flaps and slats
Two complete engines
Open / closed air brakes
Wing glove vane position
Open / closed canopy
Open / closed burner petals
Choice of weapon load out

This last option gives you two AIM-9 Sidewinders, four AIM-7 Sparrows, six AIM-54 Phoenix and two drop tanks. As can been seen that’s a full war load plus two spare.

Rivets or should that be quick fasteners on a modern jet? Well yes they are there but look at any F-14 and you’ll see they are covered in them. Are they over done? In my opinion I would say not especially once it has received a coat of paint.

There is no fancy wing sweep parts in this kit although the wings are movable each one is independent, this I don’t see as a problem.

The Instructions
The front cover covers the read before section, symbol guide and decal application method. Pages two and three cover the sprue layout and list the unused parts, this then leads to the thirteen assembly steps beginning with the cockpit and radar. As mentioned earlier lots of options present themselves throughout the build and that means in some cases holes will need to be opened up, so watch out for these. The instructions are for the most part clear but the step numbers are more page numbers an example is step two: Assemble two wheels, assemble the nose gear, assemble the nose gear wheel well, install the refuelling probe, install assembled cockpit, nose gear wheel well, radar into the forward fuselage and add boarding steps.
Colour call outs are made during the assemble by name and Mr.Hobby code, but check you references as the instructions would have you paint the entire gear door in Insignia Red instead of just the edging, others may be incorrect.

Markings
Decals are covered over five sheets, a small sheet covers the cockpit, a larger sheet the weapons and black / grey stencils, a third sheet the full colour stencils plus national markings while the remaining two cover the squadron markings, all the decals appear to be in register with good colour definition.

Scheme 1) F14A-75 159008 VF-32 USS J.F. Kennedy 1976
Scheme 2) F-14A-95 160379 VF-41 USS Nimitz 1978

The painting guide in both cases does not show the wavy demarcation between the upper light gull grey and underside white which was present on both these aircraft.

In Conclusion
Some would ask if we need another kit of the F-14 as we already have the Hasegawa example. With this kit, if it goes together as well as it looks then, yes, there is room the another F-14. Plus, add to that the fact you get a full weapon fit and the many options. I cannot wait to see what Hobby Boss has in line for us next in their F-14 series.

Please remember, when contacting retailers or manufacturers, to mention that you saw their products highlighted here - on AEROSCALE.
SUMMARY
Highs: Nice options, full weapon load, fine surface detail
Lows: Slightly confusing instructions, questionable colour guidance
Verdict: With its full weapons fit and many options, Hobby Boss's Tomcat looks set to build into an impressive model.
Percentage Rating
90%
  Scale: 1:48
  Mfg. ID: 80366
  Suggested Retail:  £49.99
  PUBLISHED: Mar 02, 2011
  NATIONALITY: United States
NETWORK-WIDE AVERAGE RATINGS
  THIS REVIEWER: 86.94%
  MAKER/PUBLISHER: 83.94%

About Luciano Satornetti (Littorio)
FROM: ENGLAND - SOUTH EAST, UNITED KINGDOM

Ok, firstly I build what ever takes my fancy however I mainly build 1/350 WWII era ships mainly cruisers and any aircraft. However my favourite aircraft being the mighty Beaufighter, Sepecat Jaguar, Hawker Hunter, Fw-190 and the Su-27 family. I also like wheeled armour like the Stryker and Centauro ...

Copyright ©2021 text by Luciano Satornetti [ LITTORIO ]. Images also by copyright holder unless otherwise noted. Opinions expressed are those of the author(s) and not necessarily those of AeroScale. All rights reserved.



Comments

Sounds good,just may have to get one of these !!
MAR 02, 2011 - 01:06 AM
If there are no accuracy issues, these kits become a really attractive option to use instead of the Hasegawa kits...
MAR 02, 2011 - 04:30 AM
Since I am a Tomcat fanatic, I can not have enough of these felines in my stash. Thanks for the review, and a very good one at that. I have been waiting for one before I get a kit.
MAR 13, 2011 - 01:00 AM
I haven't seen it comfirmed yet, but others have said the HB F-14 carries over the same major intake mouth profile/angle error that plagues the 32nd Trumpeter kit.
MAR 13, 2011 - 08:12 AM
   
ADVERTISEMENT


Photos
Click image to enlarge
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
ADVERTISEMENT