The past 3 months I've been strolling around Armorama most of the time working on 2 campaigns. Now that my new Leopard 2A4GR is in the books and the M 110 close to the end of the assemly line, I think it's time to build some flying plastic again, isn't it?

For my next project I've chosen another fine dual combo from Eduard, as usual in 1/48 scale. Early last year, when there still were models shows around, I found this nice kit of the P-39 Airacobra. I think it's a nice idea of Eduard to call it Bella, and I shamelessly take the name over for my new build blog.

Okay, let's see what we have here. As always the box art is already half the purchase ....

.... in the box are parts in grey plastic for 2 complete kits of Red Star Cobras ....

.... let's have a look at the sprues. All sprues are double. First we have Sprue A with fuselage and cockpit parts ....

... Sprue B has the wing and further parts for cockpit and the front wheel ....

.... Sprue C has various parts for the landing gear and prop ....

.... the sprue with the clear parts has the canopy, the famous "car doors" and the armor glass for the pilot ....

.... as this is a Profi Pack, we find also PE parts and masks for boths builds ....

.... with every Profi Pack comes a colourful building instruction which looks like a booklet ....

.... like on my finnish "Mersu", Eduard offers again 10 tasty looking versions of VVS Cobras and after some long thinking I've decided to build "White 103" of the 213. GIAP, a P-39Q, because it's the most colourful Cobra and wears the Guards Banner on one door and the Alexander Nevsky Order on the other ....

.... the decals are again printed by Cartograph and made the decision not easy ....

I have already looked for the right paints, this time from Revell and Vallejo, and will start in the next few days ....

Happy modelling!
Torsten

Wait! Didn't I say Dual Combo? Hmm, yes I did ....

Okay, then let's have a look at this one ....

.... the box already looks a little battered because it's really an old kit in my stash. Look at this! Do remember when Eduard started in the 1990's with their well known brown plastic parts?

.... and look at this! A nose weight included in the kit! And what kind of masks are that? I even found the sales slip inside the box. The date when I bought this kit was the 2. October 2003, which makes it one of the oldest kits left in my stash. The hobby shop from my hometown sadly does not exist anymore, btw ....

.... the plastic parts look all the same as in the Dual Combo. Really? No they don't! With Sprue B comes here a pilot which is missing in the Dual Combo. But I'm sure I won't need the guy ....

.... the building instruction is still in black, white and blue and comes in A5 size ....

.... after all these years hiding somewhere in my stash, the decals (made by Cartograph) still look in good shape and offer 3 versions of a VVS, French and a USAF version ....

.... I have decided to go for the US Cobra on the box art, again a P-39Q from the 46th FS, 15th FG on Makin Island in summer 1943 ....

.... no PE parts here, it's only half a Profi Pack with masks and w e i g h t.

Still have to look for the correct paints for this beauty. Will spray some colour samples in the next days and see what will come out of that. So now I have my 2 builds together, a Bella Red Star and a Bella White Star. Will start to build them in the next few days and I hope some of you guys will join me again along the way.

Happy modelling and stay safe!
Torsten

After working on both kits for a few days, I can finally show some progress.
While Magnus has his small parts on sticks, I found the clamps some great little helpers. Here all cockpit parts for both Bella Red and Bella White ....

.... and the canopy parts for both. I found another set of EX250 masks in another Cobra kit, which I use here instead of that old 2003 masks ....


Next step is painting Interior Green and I hope to show some further progress soon.

Torsten

At the moment there's only slow progress on my Bellas but at least there is some progress. I've painted both cockpits and decided not to use the PE parts for the instrument panel this time. I save them for a later build .... Have used the plastic part of the kit and the decals for them. They don't look bad at all ....

.... cockpit assembly is also done by now. But I have used the PE seatbelts here. They consist of 4 parts per seat. There is no difference in the builds yet (except for the colour of the plastic) but I will name them in red and white ....

.... for painting the cockpits I've used Vallejo 71010 Interior Green FS34151 ....

.... while there is the balance weight shown in the old instruction (sorry, a bit blurred) ....

.... in the new instruction the Eduard Bunny reminds us not to forget some weight (I like the look of it) ....

.... and believe it or not, I found another balance weight in another early Dual Combo with RAF and VVS Cobras ....

There will be no further update the next days because I'll be away for the weekend. But hopefully more progress next week.

Thanks for stepping in and stay safe!
Torsten

Right now I apply some cockpit decals and have noticed that all stencils on the decal sheet of my VVS Cobra are in english .... And that makes me wonder if all P-39 delivered to the SU had english stencils applied at the Bell plant? I'm pretty sure that none of the brave soviet mechanics spoke english. Or were the stencils painted over and replaced in russian language? Though most Cobras were left in the camo in which they came over the big pond.

Can anyone answer my question?

Torsten

Great start Torsten, the nose weights are impressive

Very nice progress on this red/white duo Torsten, I will be following for sure.

Cheers, D

Thanks for your feedback, guys! Yes, these weights are great and makes it a lot easier than looking for some screws and bolts or old tyre balance weights. Too bad, Eduard don't produce them anymore ....

Nothing new worth showing here yet. I'm working now on the wings where a difference between both builds will be seen. Have also put the fuselage halves together. This looks like a pair of fun builds. More to follow soon ....

Torsten

Torsten! That's some major sticks you've found for your clamps ! My kids have these but I don't dare to borrow them, they would probably spot the paint spills when I handed them back...

Looks like a fun project. I actually did the Monogram kit in my youth and I remember that one as well as a fun build with all this Monogram detail that wasn't very common in the 1980s.



Magnus

Thanks for stepping in, Magnus. I also remember the good quality of early Revellogram kits, especially that F-86 D Sabre which I built in the early days of this century as one of my first ever kits and brush painted.

Speaking of older kits, here's my Hasegawa P-400, which I've built in 2010 or 2011. A bit dusty but still looking good. Painted with Revell Aqua and Agama paints back in those days ....


Anyway, some little progress about what I did yesterday and today. Fuselage halves are together now. Just have to sand the seams. The Revi .... gun sight .... of Bella Red has broken off the IP for 95 times now already, so I will give it one last chance before I glue the canopy to the fuselage ....

.... over at Armorama Peter Battle would recognize my builds now because of the rubber bands .... I still have to attach the PE parts for the cooler flaps on Bella Red ....

.... here is the difference of Bella White to Bella Red. In the middle there will be an external fuel tank later and gun pods will be attached under the wings. The VVS Cobra won't get that ....

.... first test fittings showed some ugly gaps between the fuselage and wings on both builds. So I've ordered some putty for correction ....


Thanks for looking !
Torsten

Another small update from my Bellas today ....

I was right to order a truckload of putty for my builds. This is how the US Cobra looked like after dry fitting. The right side is okay and can be filled with glue but here is a WW 1 trench visible ....

.... okay, let's work. Step 1 - clear tape ....

.... Step 2 - putty, left to dry over night ....

.... while Bella White has the gap only on the left side, Bella Red has it on both sides ....

.... it is as always, preparation takes longer than operation. After a few minutes of sanding the clear tape looks "heavily used" but is not torn ....

.... because of the clear tape, all panels are safed and not harmed, though during polishing this little hole came up. Might go over it again. But the result really pleases me ....

.... the right side ....

.... the result on Bella White is even better ....


Thanks for looking! Have a great weekend!
Torsten

Did some work on my Bellas. First I changed the look of the muzzle covers for the .50's a bit. Left side is what the kit offers and I drilled them open a bit ....

.... from my reference photos (Osprey) I noticed that the muzzles are not completely covered so I used 1 mm Evergreen Profiles and drilled them also open. The muzzles on the US-Cobra are a bit too long but they are still okay. I'll see what I can do with the 37 mm cannon later ....

.... further work is done. The clear parts fit not well to the fuselage. Especially the door on Bella White. I had to bend it carefully to fit somehow. But it looks worse here on the photo than in real. I will leave one door open to have some "action". Getting the masking paper inside was a bit fiddly but I always win ....





At least here you see that the moulding form is one of the early works of Eduard and over 20 years old. Todays Bf 109 or Spitfire moulds are a completely different world.
Both kits are now slowly looking like Airacobras and I hope to throw some paint on them on the weekend.

Thanks for looking and stay safe!
Torsten

Great to see these 2 airframes come together Torsten, and a really good tutorial on the wing root repairs!

I'm looking forward to the beginning of the paint process, they are an attractive but unusual design. I have the 1/32 Special Hobby kit (with RAAF markings) stashed away, but following your builds here I'm getting the urge to bring it closer to the top of the to-do pile!

Cheers, D

Thanks, Damian! I have a decal sheet here by Eagle Strike called "Venomous Cobras of the world" and among them is also a RAAF version. Don't know when or if I'll build it. It's just in OD/NG.

Have done a bit more on my Bellas. First the cooler flaps on Bella Red ....

.... followed today by primer ....

.... and some crocodiles at work ....

I have just started painting the black walk ways on both. More paint in the next days.

Thanks for stepping in!
Torsten

Another small update from Bella Red. First "real" paint is on ....

As we all know, the Soviets overpainted the US insignias on their Cobras with various paints. That's what I did yesterday evening. I hope I have got the dimensions about right as the Red Stars were usually bigger that the US roundels. The stars on/under the wing have 24 mm in size, so I try 22 mm for the roundels, the stars for the fuselage have 22 mm in size, so the roundels here are 18 mm in diameter. Well, I'll see at the end of the build if I have worked correctly ....


.... for the wing underside I have used Vallejo 71318 Russian Greyish Blue AMT-7 and for the upperside and the fuselage I used 71301 Russian Camo Green AMT-4 ....

.... meanwhile I have painted the overspray white again and Bella Red has also got its white snout. This is my last update before my vacations. More painting and building in about 2 weeks.

Torsten