Air Campaigns
Want to start or join a group build? This is where to start.
Hanger Queen 7
md72
#439
_VISITCOMMUNITY
Washington, United States
Joined: November 05, 2005
KitMaker: 4,950 posts
AeroScale: 3,192 posts
Posted: Monday, February 06, 2017 - 09:09 PM UTC
Little bit here, little bit there, all of a sudden my list of 24 tasks is down to 5!!! Progress!:



Put the prop together
decals
attach the landing gear doors
paint the exhausts
add the antennas and pitot tube

Almost there....
AussieReg
Staff MemberAssociate Editor
AUTOMODELER
#007
_VISITCOMMUNITY
Victoria, Australia
Joined: June 09, 2009
KitMaker: 8,156 posts
AeroScale: 3,756 posts
Posted: Tuesday, February 07, 2017 - 12:43 AM UTC
Some great work gong on here, really satisfying to get some of these old builds ticked off the to-do list I'm sure.
Mike, up close you can see some of the fit issues, but the finish and the markings on that Vega look great.
Mark, your P-51 is looking good. Very nice NMF, looking forward to decals going on. Close to the line now with the bulk of those jobs deleted from the list mate.

Cheers, D
md72
#439
_VISITCOMMUNITY
Washington, United States
Joined: November 05, 2005
KitMaker: 4,950 posts
AeroScale: 3,192 posts
Posted: Tuesday, February 07, 2017 - 01:34 AM UTC
Thanks D!. The finish is ---old-new-Floquil Old Silver. I heard that Old Silver was the best stuff for NMF work. Finally stumbled across a bottle at the LHS. Turns out it wasn't lacquer based like real Old Silver, so I guess that made it New Old Silver. However Rust-oleum killed off the Floquil line so that made it Old - New - Old Silver.

It did work way better than Testors Silver. The paint cured, dry to the touch in a reasonable time. The paint job itself is 3-4 years old (Mustang Heaven Campaign) and holding up OK. I did notice it getting a but sticky to the touch while I was working on the cockpit, but that could be finger grease and not the paint. Still I'm using a cloth glove to handle the model as I finish it off.
md72
#439
_VISITCOMMUNITY
Washington, United States
Joined: November 05, 2005
KitMaker: 4,950 posts
AeroScale: 3,192 posts
Posted: Thursday, February 09, 2017 - 08:17 PM UTC
And now for something completely different:


But wait a minute Mark, aren't you working on a Mustang? Well yes, but this an Academy 1/72 P-51B that I 'finished' back in 2000. while it's been in storage a mouse ate the paint off of the spinner and the port side decal broke up. So while I was doing the spinner on my 1/48 P-51, I went ahead and repainted the spinner on this one too.

As to the Testors 1/48 P-51D, a made a little progress and even got a decal on it.


Now I have to pack them all away as I head to China for 3 weeks.
MLD
_VISITCOMMUNITY
Vermont, United States
Joined: July 21, 2002
KitMaker: 3,569 posts
AeroScale: 419 posts
Posted: Thursday, February 09, 2017 - 08:41 PM UTC
annndddd.. done.
Now to drag out the ladder after school and hang the Vega there just next to the Electra and after the Spirit of St Louis.


Pics in the gallery later.

what's next..? Stuka, F15 Gulf War, Su-34... Macross Valkyrie????
tinbanger
_VISITCOMMUNITY
Ontario, Canada
Joined: February 04, 2008
KitMaker: 2,507 posts
AeroScale: 1,814 posts
Posted: Monday, February 13, 2017 - 05:39 AM UTC
This will be my Hanger Queen entry:-



Dragon164
#226
_VISITCOMMUNITY
British Columbia, Canada
Joined: February 20, 2012
KitMaker: 1,909 posts
AeroScale: 508 posts
Posted: Monday, February 13, 2017 - 07:40 AM UTC
Well, after being shamed into joining this campaign by Mark

I decided to do this.

Cheers Rob.

md72
#439
_VISITCOMMUNITY
Washington, United States
Joined: November 05, 2005
KitMaker: 4,950 posts
AeroScale: 3,192 posts
Posted: Monday, February 13, 2017 - 06:21 PM UTC
I told you it would be fun. Looks like a neat kit, 1/48?
Dragon164
#226
_VISITCOMMUNITY
British Columbia, Canada
Joined: February 20, 2012
KitMaker: 1,909 posts
AeroScale: 508 posts
Posted: Wednesday, February 15, 2017 - 06:15 AM UTC
Yes 1/48, I started it in the 80's cut all sorts of panels out to add details I have since put them all back you can see in the last pic a bit.

Cheers Rob.
md72
#439
_VISITCOMMUNITY
Washington, United States
Joined: November 05, 2005
KitMaker: 4,950 posts
AeroScale: 3,192 posts
Posted: Wednesday, February 15, 2017 - 10:11 AM UTC
I've long wanted to open up panels on a kit and show the electronics bays, just never been brave enough to do it.
Northern_Lad
_VISITCOMMUNITY
United Kingdom
Joined: September 17, 2012
KitMaker: 462 posts
AeroScale: 42 posts
Posted: Saturday, February 18, 2017 - 02:32 AM UTC
After languishing on the shelf for a couple of years, I’ve attacked this Henschel HS123 with a hairy stick. It needs a touch up here and there. Just so long as I can maintain momentum and not get distracted with at least a dozen other ongoing projects, this baby might get finished sometime soon.

here are a few pics.









cheers

Matthew
spaarndammer
_VISITCOMMUNITY
Noord-Holland, Netherlands
Joined: January 28, 2007
KitMaker: 1,945 posts
AeroScale: 388 posts
Posted: Thursday, February 23, 2017 - 11:28 AM UTC
That Henschel has a very nice camo pattern, Matthew, it looks very good, as does the many other projects that are being saved in this campaign.

I didn't sit still either. The MIG-21 is a nice distraction from my P-47D build.

The Mig-21 is now painted in its intended colors:


And an Alclad Aqua gloss coat was applied 3 times by brush for the decals.

In the box of the Mig i found also these Shelf Oddity R-60 AA missiles, which apparently were ordered by me to dress up the Mig. The stuff is pretty tiny, with the missile body ~ 2cm in length. Lucky enough all fins have very small pins that seem to fit in holes in the body, so according to instructions, building these missiles shouldn't be too difficult .





Jelger
spaarndammer
_VISITCOMMUNITY
Noord-Holland, Netherlands
Joined: January 28, 2007
KitMaker: 1,945 posts
AeroScale: 388 posts
Posted: Tuesday, February 28, 2017 - 11:36 PM UTC
Started with decalling. There are quite a few. One side is almost done and gives a good impression how it will turn out in the end.

Decals set fine with a bit of set and sol, although there is quite a bit of unprinted decal film, which is better to remove first before applying decals.





Jelger
SGTJKJ
#041
_VISITCOMMUNITY
Kobenhavn, Denmark
Joined: July 20, 2006
KitMaker: 10,069 posts
AeroScale: 3,788 posts
Posted: Wednesday, March 01, 2017 - 02:39 AM UTC
Beautiful Camo, Matthew! Very nice brush work!
ltb073
_VISITCOMMUNITY
New York, United States
Joined: March 08, 2010
KitMaker: 3,662 posts
AeroScale: 174 posts
Posted: Saturday, March 11, 2017 - 11:44 PM UTC
Is this too much complete to fit into the Hanger Queen topic
 photo P1100167_zpsmbpzuagf.jpg
It was originally for the Operation Market Garden Campaign a while back but I never finished it
rochaped
_VISITCOMMUNITY
Lisboa, Portugal
Joined: August 27, 2010
KitMaker: 679 posts
AeroScale: 669 posts
Posted: Monday, March 13, 2017 - 02:45 AM UTC
Hi,

So I've come to the conclusion that this Hasegawa 109 K that's been linking in my shelf for years would be the best runner up for this campaign.

here goes 2 pics...


As it was till late last month, and the fact that I was unable to properly use the masks to get a perfect Blau 16 number got it on hold till now



Cleaned the fuselage sides and started repainting it

Cheers
Pedro
ltb073
_VISITCOMMUNITY
New York, United States
Joined: March 08, 2010
KitMaker: 3,662 posts
AeroScale: 174 posts
Posted: Sunday, April 02, 2017 - 04:14 PM UTC
Well I thing I can call this 1 finished. I painted the lines on the windshield, Cleaned up the camo and invasion strips and added the markings
 photo P1100170_zpse0jdd2w2.jpg photo P1100169_zpskarmwuzv.jpg
Glad this 1 is finally finished
Now to take shoe shots for the gallery
md72
#439
_VISITCOMMUNITY
Washington, United States
Joined: November 05, 2005
KitMaker: 4,950 posts
AeroScale: 3,192 posts
Posted: Monday, April 03, 2017 - 11:12 PM UTC
Finally pulled the P-51 back out after it being on hold for a month and a half while I traveled and got everything else out of the way. During the hiatus, I noticed that the instruction sheet calls out for 3-4 of the 5 invasion stripes under the fuselage... It's for sure White-Black-White and maybe another Black but it's just a tine bit fwd of the rear wheel well. SO my list grows once again, just as I was sure I was near the end......
wrenchy
_VISITCOMMUNITY
Saskatchewan, Canada
Joined: April 23, 2006
KitMaker: 140 posts
AeroScale: 89 posts
Posted: Monday, April 17, 2017 - 09:47 AM UTC
Pulled this out. I started it 20 years or so ago. Let's see if I can get it done
SGTJKJ
#041
_VISITCOMMUNITY
Kobenhavn, Denmark
Joined: July 20, 2006
KitMaker: 10,069 posts
AeroScale: 3,788 posts
Posted: Tuesday, May 02, 2017 - 01:44 AM UTC
I have this unfinished build from last year. I am going to experiment with jet engines and the wings and fuselage.
Very what if



More to follow later
md72
#439
_VISITCOMMUNITY
Washington, United States
Joined: November 05, 2005
KitMaker: 4,950 posts
AeroScale: 3,192 posts
Posted: Friday, May 05, 2017 - 10:20 AM UTC
Well, back to where I was before I started:

Got the invasion stripes on the bottom of the fuselage, now I've got to re-glue the canopy in place and then back to the decals..
Bigrip74
_VISITCOMMUNITY
Texas, United States
Joined: February 22, 2008
KitMaker: 5,026 posts
AeroScale: 2,811 posts
Posted: Wednesday, May 31, 2017 - 09:44 AM UTC
Hello, Jesper and Mark. I need to join HQ7 for this Soviet Phoenix build that just was left behind for many reasons.

Lakota
#123
_VISITCOMMUNITY
New Mexico, United States
Joined: November 17, 2008
KitMaker: 1,202 posts
AeroScale: 292 posts
Posted: Monday, June 12, 2017 - 07:20 AM UTC
Howdy Y'all
@Sal-Congratulations on finishing your hangar queen.
@Mark-Nice progress, I need to go back and look at the work you've been doing and the kit you're using.
This will be my entry into the campaign:
Take care,
Don "Lakota"

MLD
_VISITCOMMUNITY
Vermont, United States
Joined: July 21, 2002
KitMaker: 3,569 posts
AeroScale: 419 posts
Posted: Monday, June 12, 2017 - 07:27 AM UTC
Don, welcome to our madness.. it's been a little slow around here lately, but with the start of summer we should have a little more time to knock off a few more of these ancient stalled builds.

I had to apologize to the crew over in Unfinished Business, I *shudder* started and nearly finished a new kit.. *hangs head in shame* and it's a tank..
Trumpeter's 1/35 Su 101 mostly fictional tank destroyer



Keep pluggingr away.
md72
#439
_VISITCOMMUNITY
Washington, United States
Joined: November 05, 2005
KitMaker: 4,950 posts
AeroScale: 3,192 posts
Posted: Sunday, June 18, 2017 - 09:05 AM UTC
AARRGGGHHH. I get back to the P-51, find the decals and the first one, a checkerboard cracks into pieces...