login   |    register
Air Campaigns
Want to start or join a group build? This is where to start.
Edgar Brooks Memorial Spitfire Campaign
Antilles
_VISITCOMMUNITY
Nordrhein-Westfalen, Germany
Joined: March 22, 2015
KitMaker: 670 posts
AeroScale: 614 posts
Posted: Wednesday, December 21, 2016 - 08:05 PM UTC
Michael,

as Torsten said, thank You very much for the ribbon and leading this campaign. Though it was for a sad reason, I learned a lot about the Spitfire.

Oliver
BlackWidow
_VISITCOMMUNITY
European Union
Joined: August 09, 2009
KitMaker: 1,722 posts
AeroScale: 1,335 posts
Posted: Tuesday, December 20, 2016 - 01:17 PM UTC
Thanks for the ribbon, Michael, and leading this campaign. I enjoyed taking part in it though the reason for it is really sad.
And congrats to all who have finished their builds!

Torsten
MichaelSatin
Staff MemberCampaigns Administrator
AEROSCALE
_VISITCOMMUNITY
Colorado, United States
Joined: January 19, 2008
KitMaker: 3,891 posts
AeroScale: 2,886 posts
Posted: Monday, December 19, 2016 - 06:19 AM UTC
And so the Edgar Brooks Memorial Spitfire Campaign comes to an end. With 11 finished Spit- (and Sea-) fire models I think we did Edgar proud. We'll miss you Ed, but thanks for the years of inspiration and information.

Ribbons are awarded so if you didn't get one and think you should, let me know. Thanks to all who participated and congrats to all who finished!

Michael
bm4247
_VISITCOMMUNITY
Scotland, United Kingdom
Joined: December 29, 2014
KitMaker: 88 posts
AeroScale: 26 posts
Posted: Monday, December 19, 2016 - 02:11 AM UTC
Here is my completed model. May have over done the weathering. Not got anywhere near like full use of my hand yet but managed to get it finished as much as I can. Thanks for a great campaign Michael.


Merlin
Staff MemberSenior Editor
AEROSCALE
#017
_VISITCOMMUNITY
United Kingdom
Joined: June 11, 2003
KitMaker: 17,537 posts
AeroScale: 12,767 posts
Posted: Sunday, December 11, 2016 - 01:34 PM UTC
Cheers guys

My Seafire is definitely fated! I used it as a guinea-pig yesterday to try some weathering washes for review... and even they didn't perform as per the maker's instructions! Sometimes you get the feeling a model is trying to tell you "Just move on!"!

@ Oliver - The chipping on the wing roots is done by applying masking fluid with a small piece of scouring pad over Alclad, then spraying the camouflage colour. Once the masking is removed, it leaves a nice irregular area of "chipping".

@ Michael - I'll pop the photo in the gallery. I'm afraid I only took this one - and the model's now in pieces again for the review-tests.

All the best

Rowan
MichaelSatin
Staff MemberCampaigns Administrator
AEROSCALE
_VISITCOMMUNITY
Colorado, United States
Joined: January 19, 2008
KitMaker: 3,891 posts
AeroScale: 2,886 posts
Posted: Saturday, December 10, 2016 - 07:24 PM UTC
Great work everyone, we're really doing Edgar proud! 10 different Spit models in the gallery (though Rowan hasn't added his yet). Let's see if we can get a couple more before the end next week.

Michael
goodn8
_VISITCOMMUNITY
Berlin, Germany
Joined: October 12, 2008
KitMaker: 709 posts
AeroScale: 651 posts
Posted: Saturday, December 10, 2016 - 12:34 PM UTC
Rowan: After all the Seafire turns out really nice - well done! Congrats for overcome your weaker self and finish this build instead of going the easy way!

Tim: Beautiful work on this PR XIX! Have already the Airfix 1/72 and ordered the 1/48 - time to build one...

Thomas
Antilles
_VISITCOMMUNITY
Nordrhein-Westfalen, Germany
Joined: March 22, 2015
KitMaker: 670 posts
AeroScale: 614 posts
Posted: Saturday, December 10, 2016 - 05:00 AM UTC
Cheers Rowan,

Your Seafire looks very nice! I like the decent metal chipping on the wing very much. Did You overspray the metal color after applying the chipping like a filter?

Oliver
Merlin
Staff MemberSenior Editor
AEROSCALE
#017
_VISITCOMMUNITY
United Kingdom
Joined: June 11, 2003
KitMaker: 17,537 posts
AeroScale: 12,767 posts
Posted: Thursday, December 08, 2016 - 08:28 PM UTC
Hi again

Well, I'm calling this one "finished" - for now at least:



Between my car-crash Spitfire and now the Seafire, it's been one of those builds that went off the rails and stayed there. The Seafire was fighting to the end - I thought I'd solved the markings problem when I found a Revell sheet... only to discover the roundels are different proportions to Special Hobby's.

So, I haven't weathered the model, because I will either look out for Aeromaster's OOP Seafire decals which feature the same scheme, or else cut some masks.

But that's all for the future (maybe) - I'm keen to get on with a different kit in the hope I have better luck.

All the best

Rowan
Merlin
Staff MemberSenior Editor
AEROSCALE
#017
_VISITCOMMUNITY
United Kingdom
Joined: June 11, 2003
KitMaker: 17,537 posts
AeroScale: 12,767 posts
Posted: Tuesday, November 29, 2016 - 05:10 AM UTC
Hi Michael

To be honest, I don't think I can this time. Not to the standard I set for myself, anyway. I'm looking at the underwing roundel, with all its bumps and lumps to fit over - and I know it'll be a disaster! Judging by the previous decals, it can't logically be anything else. This won't be my finest effort - but it will be done...

All the best

Rowan
MichaelSatin
Staff MemberCampaigns Administrator
AEROSCALE
_VISITCOMMUNITY
Colorado, United States
Joined: January 19, 2008
KitMaker: 3,891 posts
AeroScale: 2,886 posts
Posted: Tuesday, November 29, 2016 - 04:34 AM UTC
You can do it Rowan!!

Michael
Merlin
Staff MemberSenior Editor
AEROSCALE
#017
_VISITCOMMUNITY
United Kingdom
Joined: June 11, 2003
KitMaker: 17,537 posts
AeroScale: 12,767 posts
Posted: Tuesday, November 29, 2016 - 02:17 AM UTC
Hi again

No new pics yet - to be honest, you wouldn't want to see them! I'm really feeling jinxed on this campaign, because I've run into decal problems yet again! The Seafire's decals don't match the sizes shown in the painting instructions and are the most fragile I've ever encountered. Following an initial mess-up, I've coated them with Klear, but they are still a nightmare - and to add insult to injury, aren't really snuggling down particularly well.

I know, I could pretty easily have cut some masks (and it may still come to that...) but there's the deadline looming - and, to be honest, I'm just itching to move on to fresh projects.

I'm so fighting my instincts to just be done with it and start my next build! This will probably only ever be a "view from a distance" model - but it'll be an achievement for me (and prove a point to myself) in getting something finished when I'd have normally ditched it.

All the best

Rowan
Merlin
Staff MemberSenior Editor
AEROSCALE
#017
_VISITCOMMUNITY
United Kingdom
Joined: June 11, 2003
KitMaker: 17,537 posts
AeroScale: 12,767 posts
Posted: Saturday, November 26, 2016 - 12:55 AM UTC
Cheers Michael

I hope to make a bit of progress tomorrow. The dead-flat finish of the Mil Spec enamels is a bit of a double-edged sword: it's great if that's the effect you need, but it absolutely drinks up a gloss-coat applied over it. For the Seafire, I'll be aiming for a semi-gloss finish. Post war Royal Navy kites wore full-gloss paint jobs (which may actually be true for this Seafire too), but I'll knock it back a little bit as it's only just after the war's end.

There's so much I like about the Mil Specs (I must publish my review!), I'd love to see Alclad bring out decal-ready gloss enamels too.

All the best

Rowan
MichaelSatin
Staff MemberCampaigns Administrator
AEROSCALE
_VISITCOMMUNITY
Colorado, United States
Joined: January 19, 2008
KitMaker: 3,891 posts
AeroScale: 2,886 posts
Posted: Thursday, November 24, 2016 - 10:11 PM UTC
There ya go Rowan, very nice!

Michael
Merlin
Staff MemberSenior Editor
AEROSCALE
#017
_VISITCOMMUNITY
United Kingdom
Joined: June 11, 2003
KitMaker: 17,537 posts
AeroScale: 12,767 posts
Posted: Thursday, November 24, 2016 - 09:47 PM UTC
Nice one Tim

The Spit looks great in Swedish markings.

I've made a bit of progress on the Seafire:





I've used Alclad's Mil Spec enamels again. They go on very nicely, drying amazing quickly with a dead flat finish.

All the best

Rowan
TimReynaga
Staff MemberAssociate Editor
MODEL SHIPWRIGHTS
_VISITCOMMUNITY
California, United States
Joined: May 03, 2006
KitMaker: 2,500 posts
AeroScale: 318 posts
Posted: Wednesday, November 23, 2016 - 04:44 AM UTC
PR XIX (S 31) is done!

A final appplication of “flat Future” (Future floor polish with a bit of Tamiya flat base added) knocked down the shine to a nice matt finish.


The exhaust stacks were brush painted Testors silver (small bottle) with some Model master Gunship Gray, followed by a wash of very thin Model Master Military Brown. The little circles where the five propeller blades should be are painted masking tape; the solid props seemed too static for a “flying” model, and the open holes in the spinner were just plain ugly! I should have simply puttied the holes over before painting. Oh, well.


Anyway, the little Swede looks unconcerned as he peers out of his pressurized cockpit...

Merlin
Staff MemberSenior Editor
AEROSCALE
#017
_VISITCOMMUNITY
United Kingdom
Joined: June 11, 2003
KitMaker: 17,537 posts
AeroScale: 12,767 posts
Posted: Wednesday, November 23, 2016 - 02:20 AM UTC
Hi Jan

Nice save on your Spit! You're not the only one to come a cropper with Tamiya's decals.

I can't claim any major progress on my Seafire - it's been "one of those weeks" at work, so I hope to get properly stuck in next Sunday. By hook or by crook, with the extended deadline, I'll have something to offer as a mark of respect for all Edgar did for us.

All the best

Rowan
Antilles
_VISITCOMMUNITY
Nordrhein-Westfalen, Germany
Joined: March 22, 2015
KitMaker: 670 posts
AeroScale: 614 posts
Posted: Saturday, November 19, 2016 - 04:34 AM UTC
Wow,
great results are coming in fast!

Paul, Your Lima Challenger looks excellent. I like the decent fading very much!

Michael,
Your Spit comes out as well very nice! Congrats to You, too!

Jan,
What an amazing speed and cool result! Is this the Mk. V in 1/72 scale. Built the Mk.I in this thread. It was real fun.

Rowan and Tim,
Nice progress. Your birds will be fine! Keep on posting!

Oliver
EHAM0624
_VISITCOMMUNITY
Noord-Holland, Netherlands
Joined: January 27, 2014
KitMaker: 200 posts
AeroScale: 85 posts
Posted: Saturday, November 19, 2016 - 03:27 AM UTC
Really nice builds guys,

My entre is a Spitfire MK.V which i started some time ago.


This Tamiya model is a straight forward built, i added the apropriate Eduard set which makes the office more alive




Once all things are put together i realized that i made an error with the seatbelt,.. these are not fitted to the seat itself but to the fuselage,..


so i corrected this by using a small strip of coffee filter,.. and a stretched sprue


So it looks better when looking inside, (also added the battery and some plumbing.)

Painting


For the decals i had a bad surprise,.. first one cracked under my finger,..


Never realized that this could happen with reasonably new decals,..bit of a challenge, decal softener did not help either,..


anyway,.. i made an attempted to do a bit of restoration with first a bit of white glue to seal the decal crack and then paint over the crack,.. it looks alright (from a distance),..

This is the end result, markings are of the "Dutch" 322 squadron flying for the RAF




For Edgar.
BlackWidow
_VISITCOMMUNITY
European Union
Joined: August 09, 2009
KitMaker: 1,722 posts
AeroScale: 1,335 posts
Posted: Saturday, November 19, 2016 - 01:40 AM UTC
Great result on your Spit, Paul! And congrats on finishing this campaign.

Tim, your Flygvapen Spitfire comes along really well. I have seen an original in the Royal Swedish Air Force Museum in Linköbing during my holidays up there in 2013.

Torsten
MichaelSatin
Staff MemberCampaigns Administrator
AEROSCALE
_VISITCOMMUNITY
Colorado, United States
Joined: January 19, 2008
KitMaker: 3,891 posts
AeroScale: 2,886 posts
Posted: Saturday, November 19, 2016 - 01:32 AM UTC
Congrats Paul, and very nicely done too!

I've also finished my Pacific Coast 1/32 Spitfire XIVc. Like most PacFront kits it fought me in certain places (notably closing the fuselage around the cockpit and the resulting fuselage/wing fit) but turned out pretty well. The instructions had the numbers reversed on the landing gear/gear doors combination, which I think may also be true on their Mk.IXs but that was a fairly easy fix.

 photo 20161119_115653_zpsqdtfvqas.jpg

 photo 20161119_115732_zps7guswtdw.jpg

I do like the somewhat brutal Griffon nose and think the kit captures this well.

Hope the rest of you can use the extra time. Keep up the great work!

Michael
PeeJay74
#363
_VISITCOMMUNITY
Pennsylvania, United States
Joined: January 08, 2014
KitMaker: 425 posts
AeroScale: 401 posts
Posted: Saturday, November 19, 2016 - 12:09 AM UTC
Tamiya 1:48 Spitfire Vb "Lima Challenger"

I built this mostly OOB with the addition of the Eduard PE Zoom set. I wanted to try some new painting techniques so didn't waste too much time adding tiny details. This was my first experiment with oils for adding dirt and grime. I like the effects.







I finally managed to finish a campaign!
PeeJay74
#363
_VISITCOMMUNITY
Pennsylvania, United States
Joined: January 08, 2014
KitMaker: 425 posts
AeroScale: 401 posts
Posted: Friday, November 18, 2016 - 03:43 AM UTC
Tamiya 1:48 Spitfire Vb "Lima Challenger"

I actually managed to finish in time. I'll get some photos taken tomorrow and post for the campaign gallery.
Merlin
Staff MemberSenior Editor
AEROSCALE
#017
_VISITCOMMUNITY
United Kingdom
Joined: June 11, 2003
KitMaker: 17,537 posts
AeroScale: 12,767 posts
Posted: Friday, November 18, 2016 - 01:51 AM UTC
Cheers Michael

My heavy period at work got heavier (I guess that's only to be expected after an Area Manager's visit ), so I might need the extra-extra time...

@ Brian - I totally sympathise with you after your hand surgery. I had a carpal tunnel op last spring and, while I got back to the workbench still sporting the bandages, it's only just lately that my good hand's begun to feel approaching 100% again.

All the best

Rowan
MichaelSatin
Staff MemberCampaigns Administrator
AEROSCALE
_VISITCOMMUNITY
Colorado, United States
Joined: January 19, 2008
KitMaker: 3,891 posts
AeroScale: 2,886 posts
Posted: Thursday, November 17, 2016 - 10:35 PM UTC
Ok, with each everything going on I'm granting a one month extension to 19 December. But that'll be it,so get going!

Michael