login   |    register
Air Campaigns
Want to start or join a group build? This is where to start.
OFFICIAL: Vac and Resin Campaign
JClapp
#259
_VISITCOMMUNITY
Massachusetts, United States
Joined: October 23, 2011
KitMaker: 2,265 posts
AeroScale: 1,715 posts
Posted: Wednesday, March 04, 2015 - 11:30 PM UTC
Even provided with a pattern, I could not possibly fabricate a better looking prop, much less four identical ones.

The props on this C-47 were also cut from the vacuform sheet.





magnusf
_VISITCOMMUNITY
Stockholm, Sweden
Joined: May 02, 2006
KitMaker: 1,951 posts
AeroScale: 1,900 posts
Posted: Wednesday, March 04, 2015 - 12:14 PM UTC
Jonathan! Thanks for enlightening me: I never thought the props in vacforms were for actual use, I have always had the impression that they were included as patterns only !



Magnus
BoiseBlade
#523
_VISITCOMMUNITY
Idaho, United States
Joined: February 28, 2014
KitMaker: 342 posts
AeroScale: 250 posts
Posted: Wednesday, March 04, 2015 - 06:47 AM UTC
Thanks Jonathan.

I am debating if I want to use the Vac propeller or mold one myself.
It looks kind of weird to me.......
JClapp
#259
_VISITCOMMUNITY
Massachusetts, United States
Joined: October 23, 2011
KitMaker: 2,265 posts
AeroScale: 1,715 posts
Posted: Wednesday, March 04, 2015 - 06:43 AM UTC
Hi Jeff, yer off to a good start!



Today I built the props for the DC7. possibly the most difficult vacuform task,




sanded out the vac parts,
welded some .030 half round to the backs of the blades,
added a disc of .040 to the back of the spinner,
drilled .064 hole through the centers,
inserted 1/16" dia rod.
I have started to sculpt the resulting spinner tips to a point. bit of work left there.
BoiseBlade
#523
_VISITCOMMUNITY
Idaho, United States
Joined: February 28, 2014
KitMaker: 342 posts
AeroScale: 250 posts
Posted: Wednesday, March 04, 2015 - 06:39 AM UTC
Hi All,
Here is my started work. I marked them awhile back but finished cutting and sanding just last weekend.
b17-peter
#392
_VISITCOMMUNITY
Hessen, Germany
Joined: January 09, 2013
KitMaker: 696 posts
AeroScale: 608 posts
Posted: Monday, March 02, 2015 - 01:51 AM UTC

Quoted Text


@ Peter: could you give your impression of the Wedell Williams 44 Kit, I love Golden Age Racing a/c.




Hi Bob,
will do it gladly, the kit looks decent enough, but I haven't unpacked the parts from their bags yet. It still needs a little while to get on my bench I think, but I'll take some start photos soon.
Cheers Peter
2002hummer
#257
_VISITCOMMUNITY
Ontario, Canada
Joined: October 11, 2011
KitMaker: 812 posts
AeroScale: 458 posts
Posted: Sunday, March 01, 2015 - 11:25 AM UTC
I too picked the Canadair CC109 Cosmopolitan. I took the Welsh Models 1/144 scale kit.



The kit contains a vac fuselage resin wings and tail along with metal props and landing gear.
I should be starting soon.
Bigrip74
_VISITCOMMUNITY
Texas, United States
Joined: February 22, 2008
KitMaker: 5,026 posts
AeroScale: 2,811 posts
Posted: Sunday, March 01, 2015 - 01:10 AM UTC
@ Jonathan: you are really going to town with that DC7 and I am still having trouble finding a good abrasive just to start removing the edge material.

@ Richard: nice looking resin kit of the R3C.

@ Peter: could you give your impression of the Wedell Williams 44 Kit, I love Golden Age Racing a/c.

@ Jessie: where did you come by the Proteus Canadair Cosmopolitan? you always seem to find interesting subjects.

Bob

JClapp
#259
_VISITCOMMUNITY
Massachusetts, United States
Joined: October 23, 2011
KitMaker: 2,265 posts
AeroScale: 1,715 posts
Posted: Saturday, February 28, 2015 - 10:31 AM UTC
Hi Jessie, I'll accept your calling me Joel as a compliment.

The airframe is complete, and I've had about enough of fairing the wing root joints.





I also finished the engines. the vacuform part just had little nubs to represent the exhausts. Ive been looking at pictures of DC-7 engines, and they have cool looking obliquely cut exhaust pipes, so I cut up some bits of 1/16 dia copper tubing, and drilled holes for them. they look ok, I think.



got out my Minicraft DC-6s which are getting passed again.



"Hi guys, I'm a DC-7!"
"uh huh. enjoy your turbos. see ya."
tinbanger
_VISITCOMMUNITY
Ontario, Canada
Joined: February 04, 2008
KitMaker: 2,507 posts
AeroScale: 1,814 posts
Posted: Friday, February 27, 2015 - 11:39 PM UTC
Jessica the side flash and window decals look like they will be fun to apply!
Ranger74
_VISITCOMMUNITY
Tennessee, United States
Joined: April 04, 2002
KitMaker: 1,290 posts
AeroScale: 87 posts
Posted: Friday, February 27, 2015 - 11:25 PM UTC
Here are my choices for this build:
Resin; CMR A-8 and A-10 Shrikes
Vac: Boeing B-9, Northrup N1M and Westland-Hill Pterodactyl


Removed by original poster on 02/28/15 - 18:21:09 (GMT).
Jessie_C
_VISITCOMMUNITY
British Columbia, Canada
Joined: September 03, 2009
KitMaker: 6,965 posts
AeroScale: 6,247 posts
Posted: Friday, February 27, 2015 - 08:11 AM UTC
Jonathan, it's looking wonderfully good. You've got farther than I got on that kit

So anyway, what kind of campaign leader am I if I neglect my own campaign? Here's what I'm going to do

This is the 1/72 Welsh/Proteus Canadair Cosmopolitan, with two different RCAF schemes.
Inside the box you find a bag of resin, some white metal detail parts and a vac fuselage.

Decals

And typically basic Welsh style instruction sheets


Since this is a vac and resin campaign it's only fitting that my kit is both vac and resin in one! The vac parts

and the resin parts
JClapp
#259
_VISITCOMMUNITY
Massachusetts, United States
Joined: October 23, 2011
KitMaker: 2,265 posts
AeroScale: 1,715 posts
Posted: Thursday, February 26, 2015 - 05:42 AM UTC
Hallo Richard and Peter, nice looking resin kits good to see more boxes opened, good fortunes!

After days of filling and fairing, the Welsh Vac DC7 is almost ready for primer.

this weekend I will have the opportunity to do some painting.

anybody else working on their stuff?

b17-peter
#392
_VISITCOMMUNITY
Hessen, Germany
Joined: January 09, 2013
KitMaker: 696 posts
AeroScale: 608 posts
Posted: Saturday, February 21, 2015 - 09:39 PM UTC
Hello mates,

I'm joining here with my first full resin kit. Still wondering what to do when it comes to the rigging, leave it or tackle it
@ Richard Now you're not longer the only resin-builder
JClapp
#259
_VISITCOMMUNITY
Massachusetts, United States
Joined: October 23, 2011
KitMaker: 2,265 posts
AeroScale: 1,715 posts
Posted: Friday, February 20, 2015 - 05:51 AM UTC
Today I made up a couple of the engines.





They'll look better with some paint on them, and the intakes opened up.
tinbanger
_VISITCOMMUNITY
Ontario, Canada
Joined: February 04, 2008
KitMaker: 2,507 posts
AeroScale: 1,814 posts
Posted: Wednesday, February 18, 2015 - 06:16 AM UTC
Looks like I am the only resin build so far!
Here is my entry:-



The seaplane will be my build.
JClapp
#259
_VISITCOMMUNITY
Massachusetts, United States
Joined: October 23, 2011
KitMaker: 2,265 posts
AeroScale: 1,715 posts
Posted: Monday, February 16, 2015 - 04:11 PM UTC
The tailplane is really too thin for that approach, but I think that is what Densil is suggesting in the instructions for the wings on the KC-135, which I have just been reading.
for the very thin tail section with almost no stiffness, I'm going to go right across with a bit of .020" brass strip stock. I have .125" and .250" widths.
Jessie_C
_VISITCOMMUNITY
British Columbia, Canada
Joined: September 03, 2009
KitMaker: 6,965 posts
AeroScale: 6,247 posts
Posted: Monday, February 16, 2015 - 12:29 PM UTC

Quoted Text

my DC7 has plain butt joints for the tail plane, and Ive already determined to add a spar to that, so we will have much discussion of airframe engineering in the coming weeks, me thinks.



If you haven't sanded out the tailplanes, you can make tabs out of the waste plastic by simply sanding around it, and cutting slots in the fuselage halves.
Bigrip74
_VISITCOMMUNITY
Texas, United States
Joined: February 22, 2008
KitMaker: 5,026 posts
AeroScale: 2,811 posts
Posted: Monday, February 16, 2015 - 05:19 AM UTC
@Jonathan: thanks for the help with that abrasive I have been searching for it here and still came up empty so looks like an online product for me.

@Mike: I should have used a heavier marker as you have, like the subject.

@Stephen: I also would go with the A3, it will be an awesome looking build.

Bob
phantom_phanatic309
#372
_VISITCOMMUNITY
United Kingdom
Joined: March 10, 2010
KitMaker: 2,568 posts
AeroScale: 1,619 posts
Posted: Monday, February 16, 2015 - 03:47 AM UTC
Yeah, the Alby looks to be a fiddly build and the plastic is thin in places. I've had to scan and scale down a set of 1/48 plans for it. The ones in the kit were a bit on the small side.
The Skywarrior does give me everything. The plastic rod is meant for the refueling probe. It's even cut to the correct length already. Some square section for the spares might have been included, but buying it second hand they might have gone AWOL at some time. Not to worry as I have plenty of stuff that will work. Great thing about this kit is the inclusion of optional parts to build a tanker, recce or electronic surveillance birds. I'll be building it as a tanker.
JClapp
#259
_VISITCOMMUNITY
Massachusetts, United States
Joined: October 23, 2011
KitMaker: 2,265 posts
AeroScale: 1,715 posts
Posted: Monday, February 16, 2015 - 03:16 AM UTC
Stephen, Those are both very interesting kits. I would lean toward the A3 as well, but don't let my interests influence you.
I can just see in your photo, on the instructions that wing spars are recommended, and a design suggested, possibly even materials provided.

Mike I.'s KC-135 is apparently going to require that too, but I havent looked at the instructions of that kit, and there is no reason to think they are are explicit.

Welsh models DC-4 kit has plain but joints for wing to fuselage as well, and I can tell you that type of joint needs internal spars. (I am still struggling with that kit after a few years in the hanger - never again)

my DC7 has plain butt joints for the tail plane, and Ive already determined to add a spar to that, so we will have much discussion of airframe engineering in the coming weeks, me thinks.
phantom_phanatic309
#372
_VISITCOMMUNITY
United Kingdom
Joined: March 10, 2010
KitMaker: 2,568 posts
AeroScale: 1,619 posts
Posted: Monday, February 16, 2015 - 01:48 AM UTC
Some interesting models being built here. And some good tips too for newbies like me.

I've decided against getting a Valetta conversion from Airmodel. An interesting looking model, but the need to buy props and spinners has put me off. Not sure what would be right for the model or what would fit.

So, looking at what I have it's either a Rareplanes A-3 Skywarrior.




Or, a Joystick Models Albatros J1.




I've got a couple of buildings to finish off to give me some space on the desk so I have some time to decide. I am leaning towards the whale though, seems a lot more straight forward despite its size. And I did spend a long time hunting for some decals for it.
V2Phantom
_VISITCOMMUNITY
United States
Joined: December 26, 2008
KitMaker: 288 posts
AeroScale: 195 posts
Posted: Sunday, February 15, 2015 - 08:46 PM UTC
Well, I need to start somewhere on this build! Here's the starting sheet with the wings outlined with a marker before I start the separation and clean-up.



I did the same with the fuselage halves and then proceeded to cut them out and sand the fuselage parts flush:



It has been many years since I touched a vacuform and I am more than a little rusty! You can see where I managed to tear the base on one of the vertical fins. I also see where the tail is slightly shorter on one of the fuselages so I'll need a bit of Apoxie Putty for a fix there!
Have fun modeling
Mike
JClapp
#259
_VISITCOMMUNITY
Massachusetts, United States
Joined: October 23, 2011
KitMaker: 2,265 posts
AeroScale: 1,715 posts
Posted: Sunday, February 15, 2015 - 01:28 PM UTC
This has proven to be very good stuff