LIFE-LIKE (DEFUNCT) [ MORE REVIEWS ] [ NEW STORIES ]

In-Box Review
148
Bristol Bulldog
Bristol Bulldog
  • move

by: Frederick Boucher [ JPTRR ]

Life-Like Bristol Bulldog
Item: 09609 (Life-Like), P-609 (Pyro)


Reminiscence
Thirty-eight years ago during a road trip I discovered Life-Like 1/48 model airplanes at a shopping plaza in Madisonville, Kentucky. In the era of boring box tops merely featuring a photo of the built subject model, the dramatic box art of Life-Like, and the novelty of 1/48 Golden Era biplanes, was too much to resist. I leveraged my allowance to buy the Gloster Gladiator, recently discovered in a comic book story illustrated by the late-great John Severin. Up to then my experience with quarterscale biplane models revolved solely around Aurora Famous Fighters, so the detail of the Life-Like model was incredible. The model was, at the time, so awesome that I built another one, which I still have. Oddly, the models never became available in the area I lived in and it took a few years to find them elsewhere. I built their Fairey Flycatcher and the Bristol Bulldog, and vowed to eventually build the entire range (still working on that)! Today I still have the Gladiator, while the Bulldog was given to friends Karen & Tony; I don’t recall where the Flycatcher went.

Life-Like Hobby Kits
Today Life-Like is best known for model railroad products, a market which Life-Like entered in 1960. Sometime in the late 1960s or early 1970s Life-Like acquired the tooling of defunct model companies Adams† and Pyro††. (A full history of Pyro is now available by clicking Click here for additional images for this review below!)

Life-Like also released an extensive collection of 1/1 scale handguns, 1/16 motorcycles, coaches and pioneer wagons, dinosaurs, ships, vintage automobiles, vintage cannons, field guns, and howitzers, and no doubt more.

I do not know the year that Life-Like decided to abandon the non-railroad models although it seems to have been in the late 1970s. As for who ended up with most of those molds, please read on. I am 99.9% certain that the Bulldog, Flycatcher, Fury, and Gladiator Lindberg. This I know from examining the Lindberg kits, although Lindberg’s Gladiator has a three-bladed propeller instead of the two-blade of the Life-Like/Pyro kit.

Further Life-Like/Pyro/Inpact lore is generously provided by Alan Bussie at Oldmodelkits.com:

    Life-Like made very few if any of it’s own molds – in this respect they were like UPC. They either leased or purchased older molds. Life-Like entered the plastic assembly kit forum ‘in force’ with the lease and later acquisition of the Pyro molds. The Life-Like handguns, dinosaurs, most ships, vintage automobiles and some motorcycles came from Pyro. The old field guns came from Palmer, and some ships, helicopters, missiles, military vehicles and modern artillery from Adams. The coaches were from Miniature Masterpieces, which was originally and Adams/Revell project.

    And the end of Life-Like, most of the Pyro molds migrated to Lindberg. Some were cleaned and modified and others were released “as is”.

    Adams also produced ships and some aircraft as well as some western kits like the ‘Stage Coach’ (probably from Miniature Masterpieces). Among these were the M1 120mm AA gun, Hawk Missile Battery, Atomic Cannon, LTV(A)(4) Winnie the Whale, 105mm gun, Hawk missile battery, Missile transport helicopter, Swedish Draken Fighter (later Lindberg), Vanguard, Honest John and Thor missiles and N.S. Savannah Nuclear Cargo Ship.

    On Pyro, Inpact also issued the early aircraft, like the Boxkite and Avro Triplane. Their were six kits in this series, originally released in 1966 in association with the 20th Century Fox production of
    Those Magnificent Men in their Flying Machines movie. The last four, including the Gladiator, were released in 1967. Pyro acquired all 10 molds and reissued them all. I believe that Life-Like also reissued them all, but Lindberg only reissued the four more modern aircraft.**


Some of those models are listed below.

Bristol Bulldog
The Bristol Bulldog, perhaps the most famous RAF fighter between the World Wars, was designed in 1926 by the Bristol Aeroplane Company. Over 400 Bulldogs were produced. Bulldogs never fought for the RAF and were withdrawn from Fighter Command in July 1937. The Bulldog proved to be quite a successful export to foreign air forces, seeing service with Australia, Denmark, Estonia, Finland, Japan, Latvia, Siam, Spain and Sweden. Bulldogs battled against the Spanish Republicans in the Spanish Civil War, and 19 Bulldogs also saw combat with Suomen Ilmavoimien ( Finnish Air Force) during the Winter War against the Soviet Union, gaining six kills by five pilots for the loss of one of their own. A Bulldog scored the first Suomen Ilmavoimien aerial victory, an I-16, by SSgt Toivo Uuttu on 1 December 1939.

Life-Like Bulldog
SMER also issued a 1/48 Bristol Bulldog. The accounts I’ve read indicate that it is a lousy kit.

Life-Like packed the model sprues loose in a light weight top-tray box. Inside are over 60 silver injection plastic parts, a clear windscreen, decals, and the instruction sheet.

The sprues have quite a bit of flash, and there's some on the parts. Also some noticeable seam lines and ejector circles. I haven’t noticed any sink marks, though.

Judging the model against those of the era by Aurora, Lindberg, Monogram, Revell and Tamiya, Pyro/Life-Like kits were somewhat sophisticated. Life-Like’s engine and four-piece pilot figure is detailed, if clunky. Fabric texture details the surface, as do basic duze fasteners and hinges. Panel line detail is raised. However, much detail is ‘soft’, such as the .303 machine gun muzzles that protrude into their troughs from under panels, although some small parts, i.e., wing navigation lamps, are finely molded.

The cockpit, a floor, seat, instrument panel, and stick, is simple – and wrong (at least for the Bulldog IV, preserved in Finland). The panel is misshapen. Bulldogs did not have a cockpit floor, rather rudder troughs. I don’t know what the seat looked like, although the cockpit side structure was steel tubing.

Decals, Paint, Instructions
Look at the nice decals – sharply printed, opaque, in register, and not too thick. And not yellowed after 30 years. Markings for only one aircraft are offered, Bristol Bulldog Mk.IIA K-2171, 32 Sqn RAF. Sadly, this aircraft crashed 30 October 1935, when it lost a wing on recovery from a dive during ferry flight, crashing into the sea, killing P/O Haldane Georgeson RAF.* When I build it I‘ll probably paint it for foreign service. Spanish Bulldogs had colorful rudders and rear fuselages, and I am a fan of the Suomen Ilmavoimien, even though Finland flew the Mk.IV, and this model is an Mk.IIA.

Only basic painting guidance is provided.

Instructions are narrated and illustrated with an exploded diagram. A good history is provided. One nice feature is detailed instructions for rigging the model with thread. You can rig the model with a single piece of thread. While this technique doesn’t pass muster with serious modelers today, it is strong and saved my newly built Gladiator from destruction from the clumsy hand of my girlfriend 30 years ago!

Conclusion
I built this kit decades ago and recall it as a good model. The Gladiator fit together well and I recall the same for the Bulldog. Exterior detail is mediocre compared to kits of today. The engine is fair but clunky. The cockpit is bad although the pilot should keep the interior from scrutinizing eyes. Nice decals provide colorful markings.

Overall, I think this model can be worked into an eye-catching model worthy of anyone’s collection. Recommended.
_________
Reference

* Aviation Safety Network. ASN Wikibase Occurrence # 68561. 30 April 2012.

** Alan Bussie, Oldmodelkits.com

† Adams made 1/40 military models. I am unfamiliar whether they made any aircraft, ships, or automobiles. Some are considered to be accurate and very well detailed. (Some or all were also re-issued by Revell -- I had their 105mm howitzer -- although Revell also had their own series of 1/40 military equipment.) Adams models I know of are:

    • 105mm Annie Oakley Howitzer with Emplacement and 5 GIs (re-issued by Revell)
    • Aerial Missile Helicopter
    • Anti-Aircraft Gun w/Mount, Trailer
    • Hawk Missile Battery
    • Honest John with Truck Launcher
    • M-40 155mm self-propelled Gun
    • Thor at White Sands Missile
    • USMC 'Winnie the Whale' LVT(A)(4) with 75mm Gun

†† Pyro Plastics Corp.: Founded by inventor William Lester and his first wife, Betty, Pyro Plastics Corporation of Union, New Jersey, became a leading producer of custom-made parts for producing injection-molded plastics. The company is also remembered today for its manufacture of plastic toys, many of which are now popular collectibles. Beginning in the late 1940s Pyro made plastic clicker-type toy pistols, and in the early 1950s became a leading maker of military toys during the Korean War. With increasing popular interest in science fiction, Pyro turned to making space toys, including artfully designed spaceships and ray guns (including the Pyrotomic Disintegrator of 1952). These early toy spaceships and ray guns inspired 1970s filmmakers such as George Lucas, whose Star Wars films and toys show the obvious influence of Pyro and similar products. The Lesters sold the company in 1972. http://plastics.syr.edu/xtf/view?docId=eac/4656.eac.xml;query=;brand=plastics

Pyro made a variety of model subjects: planes, cars, guns, ships, and in a variety of scales. The Bulldog is one of four 1/48 inter-war RAF fighters: Bristol Bulldog, Fairey Flycatcher, Gloster Gladiator, and Hawker Fury; I read they acquired these molds from Inpact, an early British model company. Pyro also released these 1/48 aircraft of the year 1911:

    Avro Biplane
    Avro Triplane
    Bristol Boxkite
    Martin-Handasyde No. 3 Monoplane

Click here for additional images for this review.

SUMMARY
Highs: Nice fabric texture. Decent detail and nice decals: sharply printed, opaque, in register, and not too thick.
Lows: Simplified and clunky detail. Seam lines and visible ejector marks.
Verdict: These kits can be built into good models.
Percentage Rating
66%
  Scale: 1:48
  Mfg. ID: 09609
  Related Link: Finnish Bulldog
  PUBLISHED: May 01, 2012
  NATIONALITY: United Kingdom
NETWORK-WIDE AVERAGE RATINGS
  THIS REVIEWER: 87.04%
  MAKER/PUBLISHER: 66.00%

About Frederick Boucher (JPTRR)
FROM: TENNESSEE, UNITED STATES

I'm a professional pilot with a degree in art. My first model was an AMT semi dump truck. Then Monogram's Lunar Lander right after the lunar landing. Next, Revell's 1/32 Bf-109G...cried havoc and released the dogs of modeling! My interests--if built before 1900, or after 1955, then I proba...

Copyright ©2021 text by Frederick Boucher [ JPTRR ]. Images also by copyright holder unless otherwise noted. Opinions expressed are those of the author(s) and not necessarily those of AeroScale. All rights reserved.



Comments

Hi Gang, The review is updated with more info.
MAY 08, 2012 - 05:06 AM
Nice to see oldies like this one reviewed I've built the Gladiator (in Pyro boxing) and prefer it to the Roden offering as it's much easier to build and looks just as good from a couple feet away. Also built the Fury and have this kit half-built (which I need to finish one of these days). Thanks for putting this together Frederick! Doug
MAY 08, 2012 - 08:25 AM
Really nice to see reviews of kits I grew up with.
MAY 09, 2012 - 03:50 AM
   
ADVERTISEMENT


Photos
Click image to enlarge
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
ADVERTISEMENT