login   |    register

In-Box Review
Albatros D.III Profipack
Albatros D.III Profipack
  • move

by: Jean-Luc Formery [ TEDMAMERE ]

In January 1917, the German air fighting squadrons were successively armed with Albatros D.III's. This new type was a successor of the Albatros D.I and D.II and had the same engine, but in contrast to them, its wings were arranged as a "sesquiplane", similar to the French Nieuport .

Despite initial problems, the aircraft was very successful at the front, particularily during "Bloody April" in 1917, and it was also very popular with the pilots.

The firm Albatros Werke GmbH in Johannisthal made three series of Albatros D.III's. The engine cooler was mounted in the centre of the top wing up to serial D.2200/16 and then it was moved to the right side of the wing. production continued in an East Germany factory, Ostdeutsche Albatros werke (OAW) in Schniedemühl from spring 1917. The Albatros D.III saw service until 1918, albeit in non-fighting squadrons.

(Source: kit's instructions)

The kit
Eduard has already issued the Albatros D.III kit several times (#8017, #8038, #8035, #8436, #8437 and #1104) but apart from the Weekend Edition #8437 they are not available anymore, so it is nice to see a reissue of the kit in a new Profipack boxing.

This Profipack kit #8097 comes in a small top opening cardboard box. The kit's content is the following:
- 2 sprues of light olive styrene parts.
- 1 small photo etched fret
- 1 sheet of masks
- 1 sheet of decals.
- 1 instruction booklet.

Though the plastic of the kit is not new, it is nevertheless of very good quality. I have read several reviews of the kit on the web before writing mine and I have yet to find one which is negative about the injected parts. Moolding is crisp and surface detail excellent throughout.

Two different wings are provided in the kit, one with the radiator in the central position and one with the radiator offset. Only one marking option from the five uses the latter one. Two rudders are present as well, but the rounder one isn't used in this kit. I assume it is the one of the OAW version. Other than that, you get the usual load of parts to build a very detailled cockpit and a nice engine (though some pipes are missing and will have to be scratchbuilt).

The only complain I've read about the kit is about the wheels which appear to be too small. Since I'm not a specialist, I won't comment any further.

A PE fret is included in this Profipack kit and will add extra detail in some areas. The cockpit benefits from it (levers, seatbelts, control stick, etc...) as well as the Spandau Guns but the most interesting item in my opinion is the underside of the upper wing radiator. Indeed, the metal parts allow you to represent the shutters and the complex mechanism in a very convincing way. Unusual for a Profipack kit is that the PE parts are not pre-painted this time. However, apart from the seatbelts, it wouldn't have made sense anyway.

A sheet of masks is included and will help you to paint the wheels, the radiators, the metal parts located on the fuselage around the engine and the rudder. A more than useful addition this time!

The instructions are printed in color on an A4 sized 12 pages booklet. Page 1 has an overall description of the aircraft (history and specifications), page 2 is composed of the parts layout and the color table (Gunze), pages 3 to 6 are dedicated to the assembly steps, pages 7 to 11 to the painting and marking guides and page 12 to the masking guide.

With the decals provided, it is possible to choose between the following five marking options:
A - Oskar Müller – Jasta 12
B - Julius Buckler – Jasta 17
C - Oskar Seitz – Jasta 30
D - Rudolf Hohberg – FA(A)263 / Hans-Georg Lübbert – Jasta 11
E - Ernst Hess – Jasta 28w

All shemes are rather colorful so the choice won't be simple. The decals have been printed by Eduard and though they do not have the quality of those printed by Cartograf yet, they represent an improvement over the previous "home made" ones in my opinion. I would rate them as good.

This is a good kit and it's nice to see it available once again. Eduard's Albatros D.III can be recommended to anyone except the novice and would represent a nice challenge for someone wanting to tackle it's first WWI model. For the others, it's like seeing an old friend again, but with new clothes.

Please remember, when contacting retailers or manufacturers, to mention that you saw their products highlighted here - on AeroScale.
Highs: Good plastic parts - Easy assembly - Five marking options.
Lows: Wheels are maybe too small.
Verdict: A good kit which will represent a nice challenge for someone wanting to tackle it's first WWI model. For the others, it's like seeing an old friend again.
Percentage Rating
  Scale: 1:48
  Mfg. ID: 8097
  Suggested Retail: $ 29.95
  Related Link: Albatros D.III Profipack
  PUBLISHED: Feb 09, 2010

Our Thanks to Eduard!
This item was provided by them for the purpose of having it reviewed on this KitMaker Network site. If you would like your kit, book, or product reviewed, please contact us.

View Vendor Homepage  |  More Reviews  

About Jean-Luc Formery (TedMamere)

I'm mainly interested in WW2 aircraft and I build them in 1/48 scale.

Copyright ©2021 text by Jean-Luc Formery [ TEDMAMERE ]. Images also by copyright holder unless otherwise noted. Opinions expressed are those of the author(s) and not necessarily those of AeroScale. All rights reserved.


Minor problem with the markings for D - Hans-Georg Lübbert – Jasta 11 / Rudolf Hohberg – FA(A)263. The colour fields on the fuselage were quartered not halved. Ltn. Lübbert was nicknamed "The bullet catcher." Hence the patches on the vertical fin.
FEB 09, 2010 - 12:24 AM
I have a few on the way. A person can never have to many Albatri.
FEB 09, 2010 - 03:11 AM
I think I have 8 kits on the shelf at this time.
FEB 10, 2010 - 02:09 AM
Very nice build Stephen and colourful !
FEB 10, 2010 - 02:20 AM
It is one of my Alb. D.III builds from 1999. I did some research touching base with author Greg VanWygarden.
FEB 10, 2010 - 02:28 AM
when this came out originally, it was and still is the best Albi in this scale and still one of the best kits Eduard did, it's good to see it back... I even used one to *improve* their DV offering substantially, not that I ever finished that..hmmm now where is that stashed? I wonder :-P
FEB 11, 2010 - 04:16 AM
Bringing this up for a fellow modeler who also expressed concerns on the wheels and landing gear legs. Upper image has the old early kit wheels. Lower image has the newer mold wheels. Landing gear is shaped & bent brass 'STRUTZ' rod.
APR 21, 2012 - 12:32 PM

What's Your Opinion?

Click image to enlarge
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move