login   |    register
ICM Holding [ MORE REVIEWS ] [ WEBSITE ] [ NEW STORIES ]

In-Box Review
135
Model T RNAS Armoured Car
Model T RNAS Armoured Car
  • move

by: Darren Baker [ CMOT ]


Originally published on:
Armorama

Introduction

ICM has now produced more models of the model T than I can count, and they have done so many now, that they must know more about them than Ford. The latest Ford Model T is a fully armoured version used by the Royal Navy Air Service. According to the information supplied by ICM, only nine of these vehicles were built or I suspect highly modified by W G Allen and Sons of Tipton. Of the nine produced six are known to have reached Russia where they were used, by British crews as recognisance vehicles. They performed service in the Caucasus and Romanian fronts from June to September 1916.

Review

The packaging in this offering, is what has become the standard from ICM, a substantial cardboard tray and integrated lid, plus an additional card lid with the artwork on it. This is I feel up to the rigours of the postal system and something that ICM deserve recognition for. The sprues are packaged in a re-sealable plastic bag, which also contains a clear sprue inside its own plastic bag. An examination of the contents reveals some very cleanly moulded parts, but there are a number of ejector pins marks, which I am pleased to say have been placed in what would be hidden locations. Access to the parts for removal from the sprue is good, and that will be appreciated for the finer mouldings.

The chassis of this model is a solid piece, to which everything else is added. ICM has provided an engine for the model, but I cannot see how this can realistically be seen on the finished model. The front axle and radiator are a single moulding to which some surgery will be required to modify, the wheel connection point. This should not prove difficult and is in affect just the shortening of a connection point. You will not be surprised to hear me say, that the front wheels cannot be shown in a turned orientation, which I continue to find a disappointment. On the plus side I do appreciate the effort, put into the radiator which at the top has the Ford Emblem, nicely embossed. The rear axle and drive shaft have reasonable detail, but again surgery is required to shorten the wheel connection points.

The wheels of the model some will be pleased to hear, have been moulded as one piece including the tyre, and an armoured plate is then provided to protect the wooden wheel structure. The interior floor of the vehicle, has planking detail added which looks fair. The vehicle is in effect an opened backed car with an armoured cab for the driver. The armoured plates do have some minor ejector pin marks, that will need to remedied on the inner face. The exterior face on the other hand, has very nicely replicated fine rivet detail, which should look good when highlighted on the finished model.

The driverís location within the vehicle is completely encased in armoured plate and very little of this area will be seen as the driver has four viewing slots one in each wall. The armour plate moving forwards completely encases the engine area of the vehicle, and completely hides all of the detail that the engine offers. The addition of a starter handle and lights which have clear lenses brings construction of the vehicle itself to an end. There is a spare wheel/tyre which is provided for storage on the roof of the driverís armoured cab.

Armourment for this vehicle, is provided by a Vickers watered cooled machine gun; this is mounted on a tripod. Two styles of tripod are supplied, which place the MG at different heights, the machine gun itself is provided in two variants, one having a ribbed water cooled jacket, and the other showing the same machine gun with a leather wrap over the water cooled jacket - either of these can be used. Detail is good in all respects, with the only addition I would look at, being the drilling out of the muzzle a little. An ammunition belt and ammunition case has been supplied. The belts for these are cloth, and so do not break down when fired. Because this is a stiff straight moulding, the modeller will be required to manipulate the belt to give it a natural look.

A water container is provided with the model, but no mention has been made that I can see of the tubing from the water cooled jacket to the container, and this will be an element that the modeller will have to scratch themselves. So far as I can see no location for the locking the machine gun in place on the vehicle is provided, which I find a little unexpected. The addition of an armour plate is a nice inclusion that I am surprised was not used more often.

Conclusion

This offering from ICM, is a nice replication of a very limited run Ford Model T variant that I suspect will generate a lot of questions if displayed due to the limited number produced. If I was going to make a compliant, it would be limited to the ejector pins marks that need to be fixed on the rear of the armoured plates.
SUMMARY
Darren Baker takes a look at the Model T RNAS Armoured Car release from ICM in 1/35th scale.
  Scale: 1:35
  Mfg. ID: 35669
  Related Link: 
  PUBLISHED: Sep 30, 2020
  NATIONALITY: United Kingdom
NETWORK-WIDE AVERAGE RATINGS
  THIS REVIEWER: 87.04%
  MAKER/PUBLISHER: 84.86%

Our Thanks to ICM Holding!
This item was provided by them for the purpose of having it reviewed on this KitMaker Network site. If you would like your kit, book, or product reviewed, please contact us.

View Vendor Homepage  |  More Reviews  

About Darren Baker (CMOT)
FROM: ENGLAND - SOUTH WEST, UNITED KINGDOM

I have been building model kits since the early 70ís starting with Airfix kits of mostly aircraft, then progressing to the point I am at now building predominantly armour kits from all countries and time periods. Living in the middle of Salisbury plain since the 70ís, I have had lots of opportunitie...

Copyright ©2020 text by Darren Baker [ CMOT ]. Images also by copyright holder unless otherwise noted. Opinions expressed are those of the author(s) and not necessarily those of AeroScale. All rights reserved.



Comments

Truly "Mad Max".
SEP 30, 2020 - 01:21 PM
   

What's Your Opinion?


Photos
Click image to enlarge
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move