MICROSCULPT [ MORE REVIEWS ] [ WEBSITE ] [ NEW STORIES ]

Built Review
148
German Lozenge 1917 -1918
Flugzeugstoff a mystery solved.
  • Microsculpt decals

by: Stephen T. Lawson [ JACKFLASH ]

WWI Development of the original fabrics,

The element of surprise has always been a tactical advantage in warfare. It proved no different in the evolution of aerial combat. During WWI initial efforts to conceal aircraft from the enemy involved painting camouflage patterns by hand on the airframes. But this was time consuming, and the dope paints used added additional weight.

To help streamline aircraft production, the Idflieg (the bureau of the German War Office that oversaw Military Aviation) developed Flugstoff — aircraft linen with a dye printed camouflage pattern. This reduced the man-hours and materials otherwise used painting the camouflage patterns. And, because the dyes used to print the fabric weighed less than paint, Flugstoff had the added benefit of reducing weight — thereby contributing to improved aircraft performance.

While no official Idflieg report has surfaced detailing the origin of the colors selected, it seems likely that these camouflage patterns were based on the color theories of the Impressionist Art Movement. The concept was that when two different spots of color are placed next to one another, and viewed at a distance, the eye visually mixes them to produce a third color. This optical “blending” could be influenced by environmental lighting and thereby change the resulting third color. So practically speaking, the camouflage looked different under different lighting and blended with the surroundings. Simple yet effective. It also made the aircraft difficult to view. A pilot had to decide whether an enemy aircraft was coming at him or going away. This indecision made it possible for the German pilot to see his enemy and plot his tactics as well.

There were several different varieties of Flugzeugstoff patterns printed for use with day and night operations. The most common were the five-color (Fünffarbiger Flugzeugstoff) and the four-color (Vierfarbiger Flugzeugstoff) patterns. Both of these were printed in different color schemes for both the upper and lower surfaces. Additionally, there were different patterns and colors developed for use with Naval operations.

The four color fabric was 1320mm plus or minus 10mm wide and the five color fabric was 1350mm plus or minus 10mm wide. There was some movement inboard with the seams on the four color fabric. Still this amounted to six panels in most cases for a top wing.

a word from the company,

"These decals simulate the camouflage fabric applied to German aircraft during the First World War. While usually referred to as "lozenge" by modelers today, this term is in fact a misnomer. The repeated shapes in these patterns are not lozenges (having four sides), but rather polygons (having six sides). The German term for the material was "Flugzeugstoff" or literally aircraft covering stock. However, for our marketing purposes we decided to use the familiar (though inaccurate) term "lozenge", simply for ease of recognition by the general public.

Our first releases depict five-color and four-color fabric patterns. Each come in different color schemes for use on the upper and lower surfaces of aircraft.

The decal strips represent bolts of printed polygon fabric as it would appear, ready for application to airframes, with the edges trimmed and sewn. Dimensions are based on generally accepted information provided in Albatros publications and cited by other sources. These finished dimensions are approximately 4' 3 1/4" for the four color pattern and 4' 6" for the five color pattern. Why they are different dimensions is not clear. . ." Possibly different manufacturers had different sized rollers.

Application to the wings & flying surfaces,

These are typical for good quality water slide decals A detailed description of application methods used by the manufacturers is beyond the scope of this article. Put simply, several methods were used to apply the original printed fabric to the airframe. All methods involved the assembly of various pieces of fabric to form a covering large enough to fit the intended area. The pieces were always butt joined and sewn along the selvage edges. These coverings were then attached to the airframe by stitching them to the ribs and edges.

The most common application method by far was Chordwise, with the fabric running parallel to the wing ribs or “chord” of the wing.

An alternate application method was Spanwise. Here the fabric was applied perpendicular to the ribs, parallel to the leading edge. This was the simplest method since a single run of fabric could cover most of the wing with only a single seam needed to add any additional material. It was seen widely on narrow winged aircraft Like the Seimens Schuckert types. It was also used in some repair work.

The least common method was Diagonal, with the fabric being applied at a 45 degree angle to the line of flight. Again this meant multiple panels to cover the wing. Due to the increased area of the fabric joints this was the strongest method.

Ailerons and elevators were usually covered spanwise. This simplified application by minimizing the number of seams needed.

Application to the fuselage ,

For the fuselage; The application of lozenge panels was done differently between the three licence builders of the Fokker D.VII. That is The factory edges were not applied to the same longerons. Because of their factory assembly lines layout patterns of lozenge were not the same between Fokker Schwerin, Albatros Johannistahl and East Albatros Works Schneidemuhl. Note Longerons are the long corner edges of the fuselage two upper, two lower.

Consult references for the correct pattern and method for your subject. It was not uncommon for airframes to have mixed patterns (i.e. four color fuselage with five color wings, etc.). But these were usually due to "in - the- field" repair situations.

rib tapes,

These were strips of fabric generally applied over each full rib and around the edges of the wings to reinforce stitching. They were approximately one inch wide. The tapes could be created from camouflage fabric, or strips of solid blue or salmon pink fabric. Tapes were not applied to elevators or ailerons.

There are different opinions as to whether rib tapes were applied as a single/continous piece wrapped around the entire rib profile (both the upper and lower wing surfaces), or as individual strips for each surface. If they were single/continuous pieces, then in instances where camouflage tape was used, the continuous tape would contrast against one of the wing surface coverings (i.e. Upper scheme tapes would contrast against lower surface coverings and visa versa.). If they were separate camouflage strips for upper and lower surfaces, then they could be matched to the background pattern.

Machines built by Albatros received salmon pink or camouflage rib tapes. OAW machines received light blue or camouflage rib tapes. Fokker-built machines only used camouflage tapes.

decal texture,

The texture is a separate sheet that overlays the finished lozenge decal. Large areas of solid color, or repeating patterns on models can look a little too pristine or uniform. This can make a scale replica look toy-like. There are many ways to alter the appearance of these areas including pre-shading, glazing, dry brushing and powders. Here is another choice to add to your arsenal. Fabric texture decals. The idea is to make a fabric area look like fabric! The imitation of printed lozenge fabric on WWI models has always been an effect that has tested modeler's skills. The challenge is depicting the colors accurately without making them look too garish on such a small scale. These decals have been developed to add a subtle irregular cloth texture and tone down the lozenge patterns by about 5% without causing a significant shift in colors.

How to use,

1. These decals represent printed bolts of camouflage fabric with edges trimmed and sewn for application to airframes.

2. Study the reference material on your chosen subject. If possible, determine the patterns used for both fuselage and wings (they may differ) and the application method (see Fabric Orientation).

3. A copy of a scale drawing of the aircraft will be helpful to plan the decal layout.

4. It is essential that these decals be applied to a gloss finish. This provides the best surface for the decals to adhere. We recommend khaki or olive as a base color to help conceal any possible gaps.

5. Take your time applying the decals. Allow each piece to set before working on the next. Do one surface at a time.

6. Begin with the lower surfaces. Carefully measure the intended area (dividers are useful for transferring measurements), being sure to add a little extra at the ends—this will be trimmed later. Cut the piece of decal you need from the sheet.

7. Using tweezers dip it in the hot - very warm water for no more than five seconds. Submersing the decal for a longer period of time can dilute the adhesive and interfere with the adhesive qualities. Place it on a nonporous surface and wait for it to loosen from the paper backing.

8. Apply a small amount of Microset solution to the surface where the decal is to go. When loosened, gently slide the decal from the backing into place. You can use a moist finger or a Q-tip.

9. Exact position can be achieved by moving the decal with a Q-tip. Carefully blot up the excess moisture with a soft cloth. Then, gently press the decal to the surface, starting at one corner and working over the entire surface of the decal. Try not to shift its position. Apply a thin film of Microset over the decal and blot up any excess. Difficult areas (compound curves, extremely detailed areas) may require the sparing use of MicroSol.

10. When set repeat the process for the next panel. When the lower surfaces are done and thoroughly dry, clean up the edges with an Xacto, trimming excess material. Repeat this process for the upper surfaces.

11. When all the decal panels have been added to both upper and lower surfaces, the rib tapes can be applied. These cover all full rib (not riblet) locations of the wings. They were not applied to elevators or ailerons. Camouflage tapes can be created by cutting strips (length wise) from the decal material.

12. To apply the texture the piece should be over sized and minimal sliding will be a requirement. These are little more than some strands of colour on a clear carrier film. The decal edges will disappear very quickly.

When contacting manufacturers and publishers PLEASE mention you saw this review at AEROSCALE

Click here for additional images for this review.

SUMMARY
Highs: This some of the best lozenge as far as colour accuracy and layout. As decals go it is among the best for application. Nicely reactive to Micro Sol & set solutions.
Lows: A list should be provided for the airframe applications.
Verdict: These decals are my choice for 4 & 5 colour "lozenge" in 1/48 scale. Tom Sollers has not cut any corners and has demanded exact colours from the contract manufacturer. Well worth the cost in my book.
  DESIGN & DETAILS:94%
  CAMO COLOUR :98%
  DECAL CHOICE:96%
Percentage Rating
96%
  Scale: 1:48
  Mfg. ID: MD-48001-2,4&5
  Suggested Retail: 10.50 USD @
  Related Link: Aeroscale thread on lozenge application
  PUBLISHED: Feb 25, 2009
  NATIONALITY: Germany
NETWORK-WIDE AVERAGE RATINGS
  THIS REVIEWER: 90.97%
  MAKER/PUBLISHER: 94.50%

Our Thanks to Microsculpt!
This item was provided by them for the purpose of having it reviewed on this KitMaker Network site. If you would like your kit, book, or product reviewed, please contact us.

View This Item  |  View Vendor Homepage  |  More Reviews  

About Stephen T. Lawson (JackFlash)
FROM: COLORADO, UNITED STATES

I was building Off topic jet age kits at the age of 7. I remember building my first WWI kit way back in 1964-5 at the age of 8-9. Hundreds of 1/72 scale Revell and Airfix kits later my eyes started to change and I wanted to do more detail. With the advent of DML / Dragon and Eduard I sold off my ...

Copyright ©2021 text by Stephen T. Lawson [ JACKFLASH ]. Images also by copyright holder unless otherwise noted. Opinions expressed are those of the author(s) and not necessarily those of AeroScale. All rights reserved.



   
ADVERTISEMENT


Photos
Click image to enlarge
  • Microsculpt lozenge 5 colour
    Microsculpt lozenge - 5 colour
  • Microsculpt lozenge 5 colour
    Microsculpt lozenge - 5 colour
  • Microsculpt lozenge
    148 scale Fokker D.VII in 5 colour lozenges
  • Microsculpt lozenge
    148 scale Fokker D.VII in 5 colour lozenges
  • Microsculpt lozenge
    148 scale Fokker D.VII in 5 colour lozenges
  • Microsculpt lozenge
    148 scale Fokker D.VII in 5 colour lozenges
  • Microsculpt lozenge
    148 scale Fokker D.VII in 5 colour lozenges
  • Microsculpt lozenge
    148 scale Fokker D.VII in 5 colour lozenges
  • Microsculpt lozenge
    148 scale Fokker D.VII in 5 colour lozenges
  • Microsculpt lozenge
    148 scale Fokker D.VII in 5 colour lozenges
  • Microsculpt lozenge
    Microsculpt lozenge - 4 colour
  • Microsculpt lozenge
    Microsculpt lozenge - 4 colour
  • Microsculpt lozenge
    Microsculpt lozenge - 4 colour on a 1/48 Fokker D.VII.
  • Microsculpt lozenge
    Microsculpt lozenge - 4 colour on a 1/48 Fokker D.VII.
  • Microsculpt lozenge
    Microsculpt lozenge - 4 colour on a 1/48 Fokker D.VII.
  • Microsculpt lozenge
    Microsculpt lozenge - 4 colour on a 1/48 Fokker D.VII.
  • Microsculpt lozenge
    Microsculpt lozenge - 4 colour on a 1/48 Fokker D.VII.
  • Microsculpt lozenge
    Microsculpt lozenge - 4 colour on a 1/48 Fokker D.VII.
  • Microsculpt lozenge
    Microsculpt lozenge 4 colour with texture.
  • Microsculpt lozenge
    Windsock Eval Vol.25, #1 2009.
  • Microsculpt lozenge
    Microsculpt
  • Microsculpt lozenge
    Microsculpt
  • Microsculpt lozenge
    Microsculpt
  • Microsculpt lozenge
    Microsculpt
  • Microsculpt lozenge
    Microsculpt
  • Microsculpt lozenge
    Microsculpt
  • Microsculpt lozenge
    Microsculpt
  • Microsculpt lozenge
    Fokker D.VII (OAW) type
  • Microsculpt lozenge
    Fokker D.VII (OAW) type
  • Microsculpt lozenge
    Fokker D.VII (OAW) type
  • Microsculpt lozenge
    Appications with & without texture
  • Microsculpt lozenge
    Appications with & without texture
  • Microsculpt lozenge
    Appications with & without texture
  • Microsculpt lozenge
    Appications with & without texture
  • Microsculpt lozenge
    Appications with & without texture
  • Microsculpt lozenge
    Appications with & without texture
  • Microsculpt lozenge
    Appications with & without texture
  • Microsculpt lozenge
    Hypothetical colour scheme on a late model Fok. D.VII (Alb.)
  • Microsculpt lozenge
    Hypothetical colour scheme on a late model Fok. D.VII (Alb.)
  • Microsculpt lozenge
    Hypothetical colour scheme on a late model Fok. D.VII (Alb.)
  • Microsculpt lozenge
    Hypothetical colour scheme on a late model Fok. D.VII (Alb.)
  • Microsculpt lozenge
    Hypothetical colour scheme on a late model Fok. D.VII (Alb.)
  • Microsculpt lozenge
    Hypothetical colour scheme on a late model Fok. D.VII (Alb.)
  • Microsculpt lozenge
    Jasta 36 Fok. D.VII (OAW)
  • Microsculpt lozenge
    Jasta 36 Fok. D.VII (OAW)
  • Microsculpt lozenge
    Jasta 36 Fok. D.VII (OAW)
  • Microsculpt lozenge
    Jasta 36 Fok. D.VII (OAW)
  • Microsculpt lozenge
    Jasta 36 Fok. D.VII (OAW)
ADVERTISEMENT