login   |    register
Roden [ MORE REVIEWS ] [ WEB SITE ] [ NEW STORIES ]

In-Box Review
148
DH4
  • Roden_DH4_Boxtop

by: Rowan Baylis [ MERLIN ]

Roden's quarterscale DH4 has been available for a couple of months now, but due to the slightly patchy distribution in the UK, it's only just appeared in my local hobby shop.

The kit arrives tightly packed in a tough little top-opening box that immediately gets the creative juices flowing by being absolutely stuffed with sprues! The kit comprises:

208 x beige styrene parts (plus a few unused)
A sheet of film for windscreens and clear panels
Decals for 3 x versions

Unpacking the parts, the first point I noticed was that one of the wingtips had been slightly damaged. Whether it happened in transit or was packed that way is unclear, but it brings to mind the stories of similar damage on Roden's 1/32 scale Pfalz. Luckily, the damage is minor and should be easy to repair.

The parts are quite cleanly moulded, but there is a touch of flash here and there, plus some sink-marks (particularly noticeable on the front fuselage sides where there's detail moulded on the inside). On the plus side, ejector-pin marks are few and far between and kept pretty much out of sight. Generally, there's little to worry experienced modellers and clean-up should be quite straightforward.

Some exterior surfaces have a slightly "textured" feel. Detail consists of some engraved lines, raised items like louvres and subtle lacing on the fuselage and lightly depicted fabric effect on the flying surfaces. Wing ribs are slightly raised on upper surfaces and recessed on the undersides (as though the fabric has sagged under gravity a little. There are no rib tapes depicted, so some modellers may wish to add these as appropriate.

A full test fit is impractical because, if nothing else, this kit is all about options. It can be built in three different configurations and this means a choice of fuselage tops and nose panels, meaning the fuselage has little rigidity until the various sub-assemblies are fitted for real. Nevertheless, taping the fuselage parts together is encouraging and they fit snugly on the lower wing.

The kit features a nicely kitted-out cockpit - although the inclusion of some etched details such as seat harness and gunsights would have been a nice touch to complete this fine kit. Continuing the theme of options, there's a choice of three styles of propellers and undercarriage, for the different colour schemes. There’s a selection of machine guns, with single, or twin forward-firing guns and a three types of bombs.

As may be becoming clear, this kit isn't suitable for beginners - and probably wouldn't really make a good choice for a first biplane kit for modellers with a little experience either. While the overall construction isn't particularly complex, the two-bay wings will require careful alignment and there have been no concessions in the name of easy assembly - all the struts are separate and using a simple jig is probably a good idea to keep everything lined up straight and true.

Instructions & Decals
The instructions are well drawn, but warrant careful study on account of the number of options offered. They include a helpful rigging diagram, but be careful - it doesn't show the double-wires visible in the boxtop painting. Colour matches for Model Master paints are keyed to most details.

Markngs are provided for three aircraft:

1. DH4 N6000, 5 Sqn. RNAS, February 1918.
2. DH4 N5997, 2 Sqn. RNAS, February 1918
3. DH4 A7422, 57 Sqn. RFC, December 1917

The decals look good quality and the items are thin and glossy. The printing is sharp and the roundel centres are separate to ensure correct line-up. Sadly the register for the blue rings on their white background is a tad off on my sheet - it's a shame these couldn't have been separate too.

Conclusion
Roden's DH4 is quite a complex kit, but it should build into a very impressive model and it's great to see such an important aircraft released as such a fine mainstream kit at last. Less experienced modellers would be wise to get a few biplanes safely under their belts before tackling this one, but skilled WW1 enthusiasts will definitely relish the challenge it offers. Recommended.

Please remember, when contacting retailers or manufacturers, to mention that you saw their products highlighted here - on AEROSCALE.
SUMMARY
Highs: Well detailed, with options for 3 different versions.
Lows: Some minor sink marks to deal with and a touch of flash. Decals slightly out of register in my kit.
Verdict: Quite a complex kit that's unsuitable for beginners, but experienced modellers should have a field day building this large and impressive biplane.
Percentage Rating
80%
  Scale: 1:48
  Mfg. ID: RO 422
  Suggested Retail: 18.99
  PUBLISHED: Jun 07, 2008
  NATIONALITY: United Kingdom
NETWORK-WIDE AVERAGE RATINGS
  THIS REVIEWER: 87.85%
  MAKER/PUBLISHER: 87.09%

About Rowan Baylis (Merlin)
FROM: NO REGIONAL SELECTED, UNITED KINGDOM

I've been modelling for about 40 years, on and off. While I'm happy to build anything, my interests lie primarily in 1/48 scale aircraft. I mostly concentrate on WW2 subjects, although I'm also interested in WW1, Golden Age aviation and the early Jet Age - and have even been known to build the occas...

Copyright 2018 text by Rowan Baylis [ MERLIN ]. Images also by copyright holder unless otherwise noted. Opinions expressed are those of the author(s) and not necessarily those of AeroScale. All rights reserved.



Comments

Show us some photos of your build Lars! I have seen it on the Aerodrome. It's a beaut! Cheers, Hugh
JUN 08, 2008 - 01:11 AM
I'm with Hugh on that one , would love to see some pic's Lars . It was a while back that I pick up this gem of a kit , just haven't started it yet . To many things on the go at this point .
JUN 08, 2008 - 01:31 AM
Hi Here it is The Dh4 is a OOB, build for the swedish Distributor off Rodens. Larsa Q
JUN 08, 2008 - 02:33 AM
The story from Aerodrome Larsa Q
JUN 08, 2008 - 02:39 AM
Hi Lars , you did a wonderful job on the DH-4 The red tail really makes the kit stand out . What method did you use for your turnbuckels ?
JUN 08, 2008 - 03:28 AM
Hi T the turnbuckles was made from hotstreched Q-tips. Tiny loops was made from wire and glued into predrilled holes in the wings. the thread is a steching thread called Gold-Zack, similar to the one Aeroclub is selling.The Q-tpis are hotstreched and cut to 2mm pieces. The thread goes thrue the tiny tube and you got the first turnbuckle Just read this and use Gold-Zack. http://www.ipmsstockholm.org/magazine/2001/11/stuff_eng_tech_rigging.htm Larsa
JUN 08, 2008 - 03:37 AM
Larsa, Excellent job on the DH4 and I really like your rigging technique, just excellent. Dwayne
JUN 08, 2008 - 05:15 AM
Thanks Lars ! Cheers
JUN 08, 2008 - 01:15 PM
Here is Larsa's build on Aeroscale. Here it is on Roden's website. http://www.rodenplant.com/Gallery/422/422.htm The first mention of this kit here. Click Here.
JUN 08, 2008 - 01:53 PM
We broke our quick reply box. Working on it. Until fixed go to topic to reply.
Thanks.
   

What's Your Opinion?


Photos
Click image to enlarge
  • Roden_DH4_Parts_1
  • Roden_DH4_Parts_2
  • Roden_DH4_Parts_3
  • Roden_DH4_Parts_4
  • Roden_DH4_Film_Template
  • Roden_DH4_Decals
  • Roden_DH4_Cockpits
  • Roden_DH4_Interior
  • Roden_DH4_Undercarriage
  • Roden_DH4_Radiators
  • Roden_DH4_Wing
  • Roden_DH4_Propellers
  • Roden_DH4_Wheels
  • Roden_DH4_Instruments
  • Roden_DH4_Guns_2
  • Roden_DH4_Guns_1
  • Roden_DH4_Bombs_3
  • Roden_DH4_Bombs_2
  • Roden_DH4_Bombs_1