login   |    register
Streets of Laredo (VLS) [ MORE REVIEWS ] [ NEW STORIES ]

In-Box Review
132
Wooden Wheeled Work Wagon
  • sr32018

by: Al LaFleche [ AJLAFLECHE ]


Originally published on:
Historicus Forma

Introduction

Here is another release from VLS’s Streets of Laredo range, their alterative “Wooden Wheeled Work Wagon”. This is not the typical buckboard seen in countless westerns where one sees leaf springs and a wider track with the wheels outboard of the wagon bed. The wheels have a narrow track, are all the same size and are located under the bed of the wagon. There is no representation of any type of suspension springs. This would have been one harsh ride! The pattern maker is listed as Ben Jakobsen

The wagon

It consists of 17 parts cast in their typical cream colored resin. All parts have nicely done wood grain on all visible “wooden” surfaces. This kit comes very well packed in a zip lock bag surrounded by Styrofoam peanuts inside a reclosable corrugated cardboard box. There are no instructions, only the cover art and this presents some problems with a couple parts as we will see.

Upon opening the bag, the parts appeared to be pretty straight with no obvious warping. Examination with a straight edge confirms this. Kudos to VLS for this. The parts have relatively large pour plugs along one edge, but since most are rectangular is shape, clean up should not be a major problem as long as reasonable care is taken.

A couple wheels have films of resin between the spokes and this should clean up easily with a #11 blade. One wheel had four round blobs of excess resin in next to several spokes which will require more careful clean up. The good thing is they were in the inner edges so clean up won’t be overly critical. Wheels attach snugly to nubs on the axles. The front axle assembly consists of four parts and is posable; two of these are the hitch, though how the two parts fit together is not completely clear. There is not a full assembly to add horses, so the builder has the option of scratchbuilding this or showing a parked wagon.

The bottom of the bed has a couple locator nubs for the front axle support, the taller of the two front axle parts. This fits relatively securely in place. There is a locator nub on this for the axle proper.

The front end piece of the bed is shorter that the rear and the builder must refer to the box art for this. The seat fits on locators on the side parts, which also help indicate the right side part from the left. The back support is attached to the seat base.

The most confusing part of this kit is the rear axle assembly. The axle has “metal” supports that fit well between the rear axle locators. This leaves a mystery part, a “wooden” block. After a good deal of time examining the rear axle, I realized there was a film of resin at the ends of the “metal” braces. That matched up with the mystery part, which turns out to be a brace for the rear axle.

Conclusion

Once the purpose of the parts is finally deciphered, this will present a good addition to a western scene. Its generic nature could also find it in European scenes up through World War II.

SUMMARY
Highs: Well cast with good wood grain throughout, no warping at all. Generic style could be usable in European and other settings up to the Second World War.
Lows: Lack of instructions and a single photo make assembly a real chore. Large pour plugs
Verdict: A well cast kit that really should have instructions for some of the subassemblies, at least. Recommended only for an experienced builder.
Percentage Rating
85%
  Scale: 1:32
  Mfg. ID: SR32018
  Suggested Retail: 26.98 USD
  Related Link: 
  PUBLISHED: Apr 11, 2007
  NATIONALITY: United States
NETWORK-WIDE AVERAGE RATINGS
  THIS REVIEWER: 79.25%
  MAKER/PUBLISHER: 73.46%

Our Thanks to VLS Corporation!
This item was provided by them for the purpose of having it reviewed on this KitMaker Network site. If you would like your kit, book, or product reviewed, please contact us.

View This Item  |  More Reviews  

About Al LaFleche (AJLaFleche)
FROM: MASSACHUSETTS, UNITED STATES

Copyright ©2019 text by Al LaFleche [ AJLAFLECHE ]. Images also by copyright holder unless otherwise noted. Opinions expressed are those of the author(s) and not necessarily those of AeroScale. All rights reserved.



   

What's Your Opinion?


Photos
Click image to enlarge
  • cover
    Boxart
  • bed_top
    Bed Top
  • bed_bottom
    Bed Bottom
  • ends
    Ends
  • sides
    Sides
  • wheels
    Wheels
  • closeup
    Close-up of spoked wheel
  • seat
    Seat
  • front_axle_parts
    Front Axle Parts
  • hitch
    Hitch
  • rear_axle
    Rear Axle
  • rear_axle_side
    Rear Axle (Side)
  • rear_axle_brace
    Rear Axle Brace