login   |    register
RP Toolz [ MORE REVIEWS ] [ WEBSITE ] [ NEW STORIES ]

Tool Review
Rivets Maker
Rivets Maker Punch and Die Set
  • move

by: Neil Gardiner [ DISITH ]


Originally published on:
Armorama

What you get in the box

RP Toolz is a Hungarian company that produces a range of punches along with other modelling tools. The rivet punch kit comes in small white box. Inside, you get two bags containing the 10 punches for the set, the die baseplate, a small hammer and a multilingual set of instructions.

Down to the Nuts and Bolts (Or Rivets in this case)

I took the punches out and was instantly impressed by the quality of them. The punches are made from machined aluminium and steel and the die baseplate feels very solid when you pick it up. It has a steel base with a machined aluminium layer then clear acrylic on top, held in place by two pins, and two sprung thumbscrews to pin down the sheet. The sizes of the punches included are 0.6, 0.7, 0.8, 0.9, 1.0, 1.2, 1.4, 1.6, 1.8, 2.0 (mm). You can use brass, aluminium or styrene sheet (the instructions recommend to use no more than 0.3mm thick). I tried the punches with some spare styrene I had around and the punches worked perfectly Ė they are slightly pointed so it pushes a dome of the material through the die when you hit the punch.

The only bit of disappointment I had was the hammer you get with the set. I do love the fact they give you a hammer. Itís solid and does the job but, when you look at it, itís just not as well made as the rest of the set. My attention was then drawn to another small issue Ė as the punches are made from aluminium when you hit them with the hammer it leaves marks and dents the top of the punches. Itís not a major issue at the start but constant use will cause a lot of wear to the punch (I got round this issue by using a rubber-ended jewellers hammer I have, although wrapping the hammer head with some spare foam sheet would do as well). If RP Toolz chose to dip the hammer head in rubber it would resolve the issue in the future.

The rivets you get from the set do look great though. I did a test using the 0.7mm punch, although I forgot how fiddly placing rivets can be. I would recommend using brass or aluminium if you are going to do larger rivets, as the test I did on the styrene split the larger rivets but it could be that the styrene I used may have been a bit brittle.

Conclusion

For me, RP Toolz has hit the rivet on the head with this one. This set is a very welcome addition for the modelling community and, although this is still quite an expensive investment for most modellers, it is still more affordable and more available than other similar products on the market. The set is very well made and will last for a long time if looked after so, in my opinion, well worth the price.
SUMMARY
Highs: Well made with a good range of rivet sizes, comes with everything in the box.
Lows: Still a bit pricey for some and the hammer could be improved.
Verdict: A great set, highly recommended.
Percentage Rating
91%
  Scale: N/A
  Suggested Retail: 70 Euros
  Related Link: 
  PUBLISHED: Nov 21, 2014
NETWORK-WIDE AVERAGE RATINGS
  THIS REVIEWER: 93.00%
  MAKER/PUBLISHER: 91.00%

About Neil Gardiner (Disith)
FROM: SCOTLAND, UNITED KINGDOM

Ive been modeling on and off ever since I was a small boy. during my early teenage years I painted and gamed with fantasy figures like alot of others here, nowadays I find I will model anything armor, figures, etc. I like to keep an open mind to new methods and ways of doing things as im always tryi...

Copyright ©2019 text by Neil Gardiner [ DISITH ]. Images also by copyright holder unless otherwise noted. Opinions expressed are those of the author(s) and not necessarily those of AeroScale. All rights reserved.



Comments

Thanks a lot for your review, I bought the set along with their punch & die set but haven't tried them out yet.
NOV 24, 2014 - 11:41 PM
Yeah they arnt something that you use all the time but invaluable when you do.
NOV 25, 2014 - 06:22 AM
   

What's Your Opinion?


Photos
Click image to enlarge
  • move
  • move
  • move
  • move
  • move
  • move