148
Thursday, June 15, 2017 - 04:22 AM UTC
Revell is to re-release the 1/48 scale H-19 rescue helicopter, definitely one for any nostalgia seekers.
The 1/48 scale model kit features include separate engine doors and engine detail, and 2 seated crew and 2 rescue figures. It has the option of fitting wheeled undercarriage or the amphibious combination of floats and wheels. Revel has also supplied a display stand. I like Revells description of the H-19 as a “tenacious transport”.
It looks like there is just one set of markings.

85-5331 - H-19 Rescue Helicopter – 1/48

Please remember, when contacting retailers or manufacturers, to mention that you saw their products highlighted here – on Aeroscale.
Click Star to Rate
4 readers have rated this story.
Get a daily email with links to all our latest news, reviews, and features.

Comments

So it's a good basis for some serious modeling?
JUN 16, 2017 - 11:47 PM
That's good to know Marc. When I discovered the age of the kit I almost did not bother posting the news of its release
JUN 17, 2017 - 03:45 AM
I really liked the skin. Many model kit manufacturers like smooth skin and deep panel lines. Most aircraft actually have neither. They're riveted. Helicopters aren't even flush riveted. (Why bother?) Only very modern aircraft, made of composites, have really smooth skin. It seems very accurate. It has the straight tail boom but that covers most military versions (and if I'm right, all US military versions). The cockpit is okay but the cockpit floor is not. That is to say, there is one. The real S-55 doesn't actually have much of a cockpit floor. From the cabin you can see the undersides of the pilots' seats. There is a short thread on ARC Forums by a guy who started doing what I want to do - cut out most of the cockpit floor, give the cabin an interior, and open the sliding door. These things are not that hard to do. Unfortunately the thread stops just as it was getting interesting - fitting his sliding door. LINK I would replace the cockpit "rear windows" and use the kit's side windows - which are a bit small - as masters for simple vacform replacements - they should come out the right size. (And if they don't come out perfect, just put them in the open, slid-back position - hey, who's to know they are a bit off?) There is almost nothing on the market as far as accessories and details is concerned, but frankly, do you really need them? There were lots of decal sheets, but not so much now. What there is though is fascinating. There are, happily, heaps of detail photo's (interior too) on the internet. It's a great kit if you are starting on doing your own detailing. A simple vacform, and a bit of a chop on that cockpit floor. Detailing the cabin is easy because it's almost a simple box. Making a new side door is a matter of cutting a square of transparent plastic and sanding corners a bit round. There's no major surgery involved, the base kit is dirt cheap, and best of all, your mistakes won't be very obvious! Grtz, Marc
JUN 18, 2017 - 02:43 AM
Thanks for the link Marc, it looks a very interesting build despite the age of the kit. Just hope it continues
JUN 18, 2017 - 04:00 AM
First Helicopter I made back when it was new (both the model and the aircraft). they flew over my house about twice a day. I lived five miles south of the Factory.
JUN 19, 2017 - 09:33 PM
The S-55 was a very important helicopter, technologically. It had powered controls. In his book Chickenhawk, Robert Mason describes how they all had to transition from initial training on the OH-23 Raven (the infamous Hiller Killer) via the old Sikorsky H-19 (for its' powered controls and its' weight) to the Bell Huey. I always wanted to make a Sikorsky S-62. The US Coast Guard used them. Think of an S-55 and an S-61 having a love child - the hull was shaped like Papa S-61, only smaller, and with just one turbine engine. The "dynamic parts" (the rotors) were from Mama S-55. What you get is a cute, small Sea King. There's never been an injection molded kit of one (that I know of). There have been a couple of resin kits but they were really crude. Grtz, Marc
JUN 19, 2017 - 10:13 PM
i'm glad it comes with an option for wheels. most h19s seem to have had wheels.
JUN 19, 2017 - 11:47 PM
wolfhound, Ideal or ITC made the S-62 in the sixties. I had forgotten the 62 had the S-55 rotor/trans system.
JUN 29, 2017 - 01:11 AM
I have bought the model, from my memory It is just like the one my father built me close to sixty five years ago. I still have an abdominally dented figure from the kit in my stash.
JUN 29, 2017 - 01:42 AM
THIS STORY HAS BEEN READ 4,681 TIMES.
ADVERTISEMENT

Photos
Click image to enlarge
  • move
  • move
  • move
  • move
Revell of Germany ReviewsMORE
Airbus A350-900 In-Box Review
by Is a secret
Bristol Beaufighter TF.X In-Box Review
by Rowan Baylis | of 3 ratings, 100% found this helpful
Messerschmitt Me 262B-1/U-1 First Look
by Rowan Baylis | of 2 ratings, 100% found this helpful
Douglas A-20 In-Box Review
by Zdenek Nevole | of 1 ratings, 100% found this helpful
AW109K2 Rega In-Box Review
by Is a secret
777-300ER In-Box Review
by Is a secret
Dornier Do 215 B-5 In-Box Review
by Adie Roberts
Halifax B Mk.III In-Box Review
by Darren Baker | of 1 ratings, 100% found this helpful
B-1B Lancer In-Box Review
by Darren Baker | of 1 ratings, 100% found this helpful
Mil Mi-24D Hind-D In-Box Review
by Darren Baker
FW 190 F-8 In-Box Review
by Darren Baker
AC-47 Gunship In-Box Review
by Darren Baker | of 1 ratings, 100% found this helpful
Buccaneer S Mk 2B In-Box Review
by Darren Baker | of 1 ratings, 100% found this helpful
Super Cobra In-Box Review
by Darren Baker
Wellington Mk II In-Box Review
by Darren Baker

ADVERTISEMENT